FC-302PK37T5E20H1XXXXXXSXXXXALBXCXXXXDX
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The FC-302PK37T5E20H1XXXXXXSXXXXALBXCXXXXDX drive by Danfoss delivers 0.37 KW of power across three phases. Belonging to the VLT AutomationDrive FC 302 series, this unit operates at a voltage range of 380 - 500 VAC and features an IP20 chassis rating. It is designed without a brake chopper and uses MCA 120 Profinet.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-302PK37T5E20H1XXXXXXSXXXXALBXCXXXXDX is a sturdy Danfoss frequency converter developed under the exclusive VLT automation series. It features a well-built enclosure with a protection class of IP 20. Devices and machines with a protection category of IP 20 are resistant against dust, particulates, or debris with a diameter of more than 12.5 millimeters. With this type of protection category, accidental finger touch can safely be avoided. To achieve its typical shaft output of 370 watts, this device needs a three-phase AC line voltage with an RMS potential difference of 380 to 500 volts. At standard operating conditions, this converter achieves a true power factor of 0.9 and an efficiency of 93%.
Aside from its sturdy enclosure and high efficiency, the FC-302PK37T5E20H1XXXXXXSXXXXALBXCXXXXDX is also known for its precise RFI filter that fulfills the standards of EN 55011 Class A1/B. RFI filters act as integrated EMC filters that block out unwanted electromagnetic noise that may disrupt the frequency converter’s performance. With an A2 enclosure, this frequency converter may come with a set of built-in fans. For surface-ventilated converters with an A2 enclosure and a typical shaft output of 370 watts, the air filter has a current rating of 10 amperes.
At the rated efficiency of the FC-302PK37T5E20H1XXXXXXSXXXXALBXCXXXXDX, the corresponding power loss is 35 watts. With its IP 20 chassis, the converter weighs only 4.9 kilograms and measures 268 x 90 x 205 millimeters. To ensure that the device holds properly during operation, the FC-302PK37T5E20H1XXXXXXSXXXXALBXCXXXXDX’s mains, motor, and load sharing cables must have a tightening torque of 0.5 to 0.6 Nm. Based on its datasheet, this converter has a total of 6 digital inputs, 2 analog inputs, and 1 programmable encoder input.
Frequently Asked Questions about FC-302PK37T5E20H1XXXXXXSXXXXALBXCXXXXDX:
Q: Does the FC-302PK37T5E20H1XXXXXXSXXXXALBXCXXXXDX come with a brake chopper?
A: No, the FC-302PK37T5E20H1XXXXXXSXXXXALBXCXXXXDX does not come with a brake chopper.
Q: What type of frame does the FC-302PK37T5E20H1XXXXXXSXXXXALBXCXXXXDX have?
A: The FC-302PK37T5E20H1XXXXXXSXXXXALBXCXXXXDX comes with an E20 or A2 chassis.
Q: What are the dimensions of the FC-302PK37T5E20H1XXXXXXSXXXXALBXCXXXXDX?
A: The FC-302PK37T5E20H1XXXXXXSXXXXALBXCXXXXDX measures 268 x 90 x 205 millimeters.
Q: How many programmable digital inputs does the FC-302PK37T5E20H1XXXXXXSXXXXALBXCXXXXDX have?
A: Two out of the six digital inputs of the FC-302PK37T5E20H1XXXXXXSXXXXALBXCXXXXDX can be programmed as digital outputs.
Q: What control modes does the FC-302PK37T5E20H1XXXXXXSXXXXALBXCXXXXDX support?
A: The FC-302PK37T5E20H1XXXXXXSXXXXALBXCXXXXDX supports the following control modes: flux vector mode, voltage vector mode, and U/f mode.
