FC-302PK37T5E20H1BXXXXXSXXXXAXBXCXXXXDX Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
MPN: 131B0024
The Danfoss FC-302PK37T5E20H1BXXXXXSXXXXAXBXCXXXXDX is an automation drive from the VLT FC 302 Automation Drives series. It has a power rating of 0.37 kW, supports three phase input at 380 to 500 VAC, and delivers 0.50 horsepower output. Key features include a maximum output frequency of 590 Hz, analog output resolution of 12 bit, and protection level rated at IP20.
Internal Product Review
The FC-302PK37T5E20H1BXXXXXSXXXXAXBXCXXXXDX is a Danfoss VLT FC 302 automation drive rated at 0.37 kW for three-phase power. A 1 ms control scan interval and ±0.003 Hz output frequency resolution support precise speed regulation and stable machine response. IP20/chassis protection and a maximum output frequency of 590 Hz make this unit a strong choice for compact cabinet installations and demanding motion profiles.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-302PK37T5E20H1BXXXXXSXXXXAXBXCXXXXDX is an AC variable-frequency drive manufactured by Danfoss for the VLT FC 302 Automation Drives series. It controls induction motors in process lines, conveyors, and pump stations by varying the output frequency and voltage in response to operating demands. The drive has a rated output of 0.50 HP and 0.37 kW, making it suitable for low-power motor control applications. An internal brake chopper dissipates regenerated energy during rapid deceleration, helping control the DC bus when the connected motor returns energy to the drive.
The drive accepts a mains input of 380–500 VAC with three-phase power. Its output frequency is adjustable from zero to 590 Hz, providing a broad operating range for high-speed and conventional induction motors. A setpoint resolution of ±0.003 Hz supports precise speed commands and stable process control. The analog output provides 12-bit resolution, while two programmable relays and transistor outputs support field signaling and interlocks. Relay 02 switches loads up to 2 A at 400 VAC, and the digital outputs operate at frequencies up to 32 kHz with a maximum current of 40 mA per channel. The internal processor refreshes the control loops every 1 ms. An RFI Class A1/B filter helps reduce conducted electrical interference, while the safe-stop function supports controlled machine shutdowns.
The chassis has an IP20 rating and is intended for installation inside a protective cabinet. Standard cabinet mounting supports frame formats A, B, or C and uses conventional cable entry points. The uncoated printed circuit board is suitable for clean, dry enclosures where additional protection against moisture or chemical contamination is unnecessary. No local control panel is supplied, although the standard language pack supports menu access through a compatible remote keypad. Digital control wiring may extend up to 300 m without shielding when installation conditions permit. Shielded motor cables may extend up to 150 m, helping maintain electromagnetic compatibility across larger machine layouts. The standard cable arrangement separates motor, mains, and control connections to support organized routing within the enclosure.
