FC-302P7K5T5H1BG Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-302P7K5T5H1BG is part of the VLT FC 302 Automation Drives series and supports three phase power at a voltage range of 380 to 500 VAC. It has a power rating of 7.5 kilowatts, a true power factor of at least 0.9, and includes a brake chopper. The drive features an ambient temperature full load rating of 45 °C and comes with an LCP 102 local control panel.
Internal Product Review
The FC-302P7K5T5H1BG is a Danfoss VLT FC 302 automation drive rated at 7.5 kW for three-phase power. Operation across 380 - 500 VAC with a displacement power factor above 0.98 supports efficient integration in demanding drive systems. An included brake chopper adds strong motion-control value, making the unit a very capable 10 HP automation drive.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-302P7K5T5H1BG is an AC variable-frequency drive manufactured by Danfoss as part of the VLT FC 302 Automation Drives series. It converts fixed three-phase mains power into a modulated output that allows an industrial controller to regulate the speed and torque of an induction motor. This control helps pumps, conveyors, mixers, and other motor-driven equipment respond to changing process demands while reducing unnecessary electrical and mechanical stress. The drive also supports closed-loop operation for applications that require accurate motor control across a broad speed range.
The drive delivers a continuous mechanical output of 7.5 kW, which is equivalent to 10 HP, when connected to a three-phase supply of 380–500 VAC. Its inverter section can reach a maximum output frequency of 590 Hz, while specialized flux mode supports closed-loop control at frequencies up to 300 Hz for high-speed applications. An integrated brake chopper dissipates regenerated energy during rapid deceleration, helping control increases in the DC-bus voltage. The displacement power factor remains above 0.98, and the true power factor is at least 0.9, which keeps reactive current low on the mains supply. Local operation and parameter access are available through the LCP 102 keypad. EMC mitigation complies with EN/IEC 61800-3 Category 1 and Category 2 requirements and EN 55011 Class A1 and Class B limits, supporting installation in commercial and light-industrial locations.
Full-load operation is permitted at ambient temperatures up to 45 °C without derating. Automatic motor flux optimization adjusts magnetization to operating conditions, helping the motor maintain efficient performance under changing loads. The recommended maximum motor cable length is 150 m for shielded cable when radiated-emission compliance must be maintained, while unshielded cable can extend to 300 m in locations with low electrical interference. Power cycling is limited to 2 starts per minute to reduce stress on the internal capacitors and input circuitry. The FC 302 platform uses a consistent mechanical format that supports orderly panel placement alongside related drive components.
