FC-302P7K5T5E55H1XG Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-302P7K5T5E55H1XG is part of the VLT FC 302 Automation Drives series and delivers a power rating of 7.5 kW or 10 HP. It operates on three phase power with a mains voltage range of 380 to 500 VAC, and has an IP54/Type12 N3R protection level. This drive includes a graphical local control panel and an RFI Class A1/B filter.
Internal Product Review
The FC-302P7K5T5E55H1XG is a VLT FC 302 automation drive rated at 10 HP and 7.5 kW. Three-phase 380 to 500 VAC input supports straightforward integration with common industrial power systems. The graphical local control panel and IP54/Type 12 protection make the unit a strong choice for accessible setup and dependable service.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-302P7K5T5E55H1XG is an AC variable frequency drive manufactured by Danfoss as part of the VLT FC 302 Automation Drives series. The drive belongs to the VLT AutomationDrive FC product group and is intended for industrial automation. It supplies adjustable frequency and voltage to induction motors, allowing equipment speed to follow real-time load requirements. This control method can reduce unnecessary motor speed during periods of lower demand while supporting precise acceleration, deceleration, and steady-state operation.
This model delivers 10 HP of mechanical output when connected to a suitable motor, representing the maximum continuous shaft power the inverter can support. Its electrical rating of 7.5 kW provides the equivalent capability in metric units and supports drive sizing for the connected load. Input connections accept 380–500 VAC, allowing the unit to operate on common industrial feeders without a step-up transformer. The converter uses three-phase power and furnishes a balanced output waveform that helps maintain motor efficiency under varying loads. The IP54/Type 12/NEMA 3R enclosure protects the internal electronics against dust and splashing water, permitting wall mounting in plant areas where airborne moisture may be present. An integrated RFI Class A1/B (C1) filter minimizes conducted electromagnetic emissions and helps the installation meet applicable C1 limits.
Front-panel interaction is provided through the Graphical Local Control Panel, which gives users access to operating parameters, commands, and status information without a separate interface device. The drive has no brake chopper, so emergency deceleration energy cannot be directed to an external braking resistor through an internal chopper circuit. Applications requiring rapid stops must therefore use another suitable braking method, such as a mechanical brake or a regenerative drive arrangement. The unit carries series index 302, placing it within the FC 302 product line and its associated parameter structure. This interface supports direct review of alarms and operating conditions at the drive, while the displayed information assists with routine system monitoring.
