FC-302P7K5T5E20H2XGCXXXXXXXXXXX Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-302P7K5T5E20H2XGCXXXXXXXXXXX is part of the VLT FC 302 Automation Drives series and has a power rating of 7.5 kW or 10 HP. It operates with a mains voltage range of 380 to 500 VAC, uses three phase power, and features a coated PCB with IP20 chassis protection. The drive includes a graphical local control panel and standard cable entries, and is intended for normal cabinet mounting.
Internal Product Review
The FC-302P7K5T5E20H2XGCXXXXXXXXXXX is a Danfoss VLT FC 302 automation drive with a 7.5 kW power rating and a 380 - 500 VAC input range. IP20/chassis protection and a coated PCB support dependable cabinet performance, making this drive a strong choice for controlled industrial installations.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-302P7K5T5E20H2XGCXXXXXXXXXXX is an AC variable frequency drive produced by Danfoss for the VLT FC 302 Automation Drives series. The unit regulates the speed of induction motors used in automated conveyors, pumps, and similar equipment. By adjusting motor voltage and frequency in response to operating commands, it supports controlled acceleration, deceleration, torque, and speed. It is intended for installation in standard control cabinets and provides electronic motor regulation without relying on mechanical throttling devices.
The inverter delivers 7.5 kW of continuous electrical output, which is equivalent to 10 HP. It accepts a three-phase power supply ranging from 380 to 500 VAC, making it compatible with common industrial power systems. The drive has IP20 chassis protection, so an enclosed control panel is required to prevent unintended contact with internal components. An integrated RFI filter limits conducted electrical interference on the incoming supply conductors. Standard cable entries accommodate the line and motor wiring without requiring specialized entry hardware. The cabinet-mount arrangement supports A, B, and C frames, allowing the enclosure layout to use the appropriate mounting space for the selected drive size.
Parameter viewing and editing are handled through a graphical local control panel with a standard language pack. Its display provides access to operating values, motor settings, and drive status information from the front of the cabinet. The drive uses coated printed circuit boards that offer additional resistance to airborne moisture, dust, and other contaminants that may enter the enclosure. The unit has no brake chopper, so regenerative energy produced during motor deceleration must be managed by the application or suitable external equipment. Acceleration and deceleration settings should account for the connected load, particularly when frequent stopping could raise the DC-bus voltage. The standard control arrangement and front-panel access allow routine operating changes without altering the power wiring or removing the drive from its mounted position.
