FC-302P7K5T5E20H1XXXXXXSXXXXAXBXCXXXXDX Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-302P7K5T5E20H1XXXXXXSXXXXAXBXCXXXXDX is a drive from the VLT FC 302 Automation Drives series with a 10 horsepower rating and 7.5 kW power output. It supports three phase power at 380 to 500 VAC and features a standard RFI Class A1/B filter. The drive is designed for normal cabinet mounting and has an IP20 protection level.
Internal Product Review
The FC-302P7K5T5E20H1XXXXXXSXXXXAXBXCXXXXDX is a Danfoss VLT FC 302 automation drive designed for three-phase power at 380 to 500 VAC. A 7.5 kW, 10 HP rating gives the platform confident capacity for demanding automation service. IP20 chassis protection and an RFI Class A1/B filter make this drive a clean, dependable cabinet solution.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-302P7K5T5E20H1XXXXXXSXXXXAXBXCXXXXDX is an AC variable frequency drive manufactured by Danfoss for the VLT FC 302 Automation Drives series. It converts fixed-frequency line power into a regulated motor output for speed and torque control in automated equipment. Conveyors can adjust throughput, pumps can regulate flow, and fans can vary airflow without relying on mechanical throttling. The drive can also manage acceleration and deceleration profiles, helping reduce abrupt mechanical loading on connected equipment.
The drive has a continuous power rating of 7.5 kW, corresponding to 10 HP for motor selection. Its line input accepts 380–500 VAC, allowing connection to common 400 V and 480 V industrial systems. The unit uses three-phase power, distributing input current across all supply phases. Its integral RFI Class A1/B (C1) filter attenuates conducted electrical noise and supports compliance with applicable emission limits. Standard cable entries and cabinet-mounting arrangements for A, B, and C frames support organized power and control wiring. The drive includes no LCP keypad, so operating parameters must be accessed through supported remote programming tools. It does not contain a brake chopper, so regenerated energy requires external handling when the connected application returns energy during deceleration. Line-side isolation must also be provided separately because the drive does not have an integrated mains disconnect option.
The enclosure has an IP20/chassis rating, providing protection against accidental finger contact but not sealing the unit against dust or water. Its uncoated circuit boards require installation in a clean, dry cabinet that limits exposure to moisture, conductive particles, and airborne contaminants. The cabinet must also provide suitable clearances and ventilation so heat can leave the chassis during continuous operation. The standard language pack remains accessible through compatible remote programming tools, allowing parameter entry and status review without a local operator panel. The internal identifier is 302, matching the control platform indicated by the FC 302 model family.
