FC-302P7K5T5E20H1XGXXXXSXXXXALBXCXXXXD0 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-302P7K5T5E20H1XGXXXXSXXXXALBXCXXXXD0 is part of the VLT FC 302 Automation Drives series and delivers 10 HP or 7.5 kW of power with three phase input at 380 to 500 VAC. It features chassis-level IP20 protection, a graphical local control panel, and comes equipped with a PROFINET MCA 120 option and MCB-107 24V DC backup.
Internal Product Review
The FC-302P7K5T5E20H1XGXXXXSXXXXALBXCXXXXD0 is a Danfoss VLT FC 302 automation drive rated for 7.5 kW and 380 to 500 VAC operation. PROFINET MCA 120 communication and a graphical local control panel support efficient commissioning and dependable network integration. IP20/chassis protection with normal cabinet mounting makes the drive a strong fit for enclosed industrial control systems.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-302P7K5T5E20H1XGXXXXSXXXXALBXCXXXXD0 is a variable-frequency drive manufactured by Danfoss for the VLT FC 302 Automation Drives series. It adjusts output frequency and voltage to control the speed of induction motors in conveyors, pumps, and similar automated equipment. By matching motor power to process demand while monitoring load, the drive can improve efficiency and reduce mechanical stress during routine operation. This control method supports smoother starts, speed changes, and steady-state operation across a wide range of common industrial duties. It is intended for equipment that benefits from adjustable motor speed and controlled acceleration.
The unit connects to a three-phase AC supply rated at 380–500 VAC, so it can be used on standard industrial distribution networks without a separate transformer. Its continuous motor output is 7.5 kW, which is equivalent to 10 HP for applications such as mid-sized pumps, fans, and conveyors. The power section uses three-phase power to keep phase loading balanced during normal operation. The enclosure is an IP20 chassis type intended for installation inside a ventilated control cabinet, and it supports normal cabinet mounting in frame sizes A, B, and C. No brake chopper is installed, so regenerated energy must be handled externally when fast deceleration is required. Standard cable entries and an uncoated printed circuit board keep the layout straightforward.
System integration includes an internal EMC filter rated RFI Class A1/B (C1), which helps limit conducted emissions on the line side. Fieldbus communication is available through the PROFINET MCA 120 option card, allowing fast data exchange with a PLC or other supervisory controller. Local setup and diagnostics are handled through the Graphical Local Control Panel, which presents parameters in the standard language pack. Control continuity during power loss is supported by the MCB-107 24 V DC backup module, which keeps the control electronics active long enough for an orderly shutdown sequence.
