Product Description:

The FC-302P7K5T5E20H1XG is an AC variable frequency drive produced by Danfoss for the VLT FC 302 Automation Drives series. It belongs to the VLT AutomationDrive FC product group and uses the series identifier 302. The unit converts fixed-frequency mains power into a regulated output that lets control systems adjust induction motor speed and torque in conveyors, pumping stations, and process lines where efficient and accurate motor control is required. This control method helps the driven equipment respond smoothly to changing load conditions and process demands during normal operation.

This drive accepts a mains supply of 380–500 VAC, and its terminals are designed for three-phase power, allowing direct connection to common industrial grids. Its continuous output is rated at 7.5 kW, which corresponds to 10 HP at the motor shaft. An IP20 chassis enclosure keeps live parts finger-safe inside a ventilated installation space, so the unit must be mounted in a cabinet when higher ingress protection is needed. The drive includes an internal Safe Stop function, while regenerative energy must be handled externally because there is no integrated brake chopper. Power electronics are cooled by natural convection through the heat sink fins, which supports cabinet layouts that maintain clear airflow around the unit.

Conducted emissions are limited by an RFI Class A1/B (C1) filter, enabling installation on sensitive plant networks without extra suppression modules. Emergency deceleration relies on a no brake chopper configuration, so excess kinetic energy must be absorbed by the motor load or an external resistor. Local parameter access is handled through a graphical local control panel that shows real-time status and simplifies setup. Mechanical integration follows normal cabinet mounting for A, B, and C frames, so fastening points and spacing remain consistent with other FC 302 sizes in the same enclosure layout.