Product Description:

The FC-302P7K5T5131F2722H2BGXXXXSXXXXAXBXCXXXXDX is an AC variable-frequency drive manufactured by Danfoss for the VLT FC 302 Automation Drives series. In industrial automation, the unit converts fixed mains power into adjustable frequency and voltage for controlling three-phase induction motors. This variable output allows conveyors, pumps, fans, and similar equipment to operate at speeds that match process demand. Controlled acceleration and deceleration can also reduce mechanical stress on connected equipment while lowering energy consumption in applications that do not require continuous full-speed operation.

The drive has a rated motor output of 7.5 kW, corresponding to 10 HP. Its input section accepts line voltages from 380 to 500 VAC, making it suitable for common 400 V industrial power networks without an external transformer. The unit requires three-phase power and draws current from each phase before converting the incoming supply through its internal power stage. An IGBT bridge generates the pulse-width-modulated output waveform used to regulate motor speed and torque. The controller identifier is 302, which associates the drive with the corresponding parameter structure and mechanical format used for this product line.

This configuration has no integrated RFI filter, so external filtering must be installed when Category C1 electromagnetic compatibility limits apply. Filter selection should account for the installation environment, motor cable length, grounding arrangement, and applicable interference requirements. User interface text, parameter names, and fault messages are provided through the factory-loaded Standard language pack. English-language menus support setup, operating adjustments, and review of diagnostic messages from the drive interface. Additional supported languages can be transferred through the USB service port when a different interface language is required for the installation.