Product Description:

The FC-302P75KT5131H7152H2XGXXXXSXXXXAXBXCXXXXDX is an AC variable frequency drive produced by Danfoss as part of the VLT FC 302 Automation Drives series. The unit converts fixed-frequency industrial power into a controlled output waveform, allowing automated lines to vary motor speed for energy savings, soft starting, and precise torque regulation. When integrated into a machine control network, the drive can synchronize multiple axes, reduce mechanical wear, and support consistent product quality. Its adjustable output also helps motors respond smoothly to changing process demands instead of operating continuously at full speed. The drive uses the standard programming environment associated with this product line, allowing its operating parameters to be configured for the connected machinery.

The electrical section has a 380–500 VAC input range and uses a three-phase power connection, so it can connect directly to common industrial mains without an external transformer. Inside the inverter, IGBT switching components and the cooling system support a 75 kW continuous output. This output corresponds to a 100 hp shaft capacity for a compatible motor. The model does not include a C1 filter, so an external filter must be installed when stricter electromagnetic emission limits apply. The enclosure, busbars, and protective devices are sized to support operation under the stated electrical load. Proper cabinet airflow and suitable upstream protection help the drive maintain stable performance during sustained service.

Control functions follow the 302 platform designation, which supports the automation-oriented operating features associated with this model. The unit belongs to the VLT AutomationDrive FC product group and provides parameter menus for motor control, process adjustment, and network operation. This configuration has no preinstalled adaptation, so specialized application functions can be selected through available software templates rather than an installed application module. Interface text and help screens are supplied through the Standard language pack, which provides multilingual support without requiring an additional memory card. Operators can use the displayed menus to adjust acceleration, deceleration, speed references, and torque-related settings for the connected motor. Network integration also allows operating commands and status information to be exchanged with the machine control system.