Product Description:

The FC-302P5K5T5E20H2XGCXXXSXXXXAXBXCXXXXDX variable-frequency drive is manufactured by Danfoss for the VLT FC 302 Automation Drives series. It converts fixed-frequency supply power into a modulated output that allows industrial control systems to regulate the speed and torque of compatible induction motors. This capability supports controlled acceleration, deceleration, and continuous operation in pumps, fans, conveyors, and material-handling equipment. Adjustable motor output can also reduce mechanical stress during startup compared with direct connection to line power.

The inverter delivers up to 5.5 kW of continuous shaft power, which is equivalent to 7.5 HP and is suitable for midrange motor applications. It accepts line voltages from 380 to 500 VAC through a three-phase power input that matches common industrial distribution systems. The IP20 chassis protects against accidental finger contact with internal components, but the drive requires a suitable cabinet when dust or moisture may be present. Normal cabinet mounting is supported on A, B, or C frames, and the standard cable entries accommodate routing through conventional gland plates. The model does not include a brake chopper, so applications that require rapid braking must use an appropriate external arrangement. Adequate clearance around the chassis allows cooling air to pass through the unit and helps prevent excessive internal temperatures during sustained operation.

User interaction is provided through a graphical local control panel, which presents operating values, status information, alarms, and adjustable parameters in an accessible format. A standard language pack supplies multilingual parameter text for local setup and operation. Conducted electrical noise is reduced by the built-in RFI filter, helping limit interference returned to the incoming power network. The drive also uses coated printed circuit boards to improve resistance to airborne contaminants that could otherwise collect on electronic components. Its series identifier is 302, allowing compatible control accessories and option cards intended for the FC 302 platform to be selected. The chassis layout provides access to the power, motor, and control terminals while keeping low-voltage control wiring separated from the main power connections. Standard cable entries further simplify orderly routing within a control cabinet without requiring unusual mounting arrangements.