Product Description:

The FC-302P5K5T5E20H1XGXXXXSXXXXAXBXXXXXDX is an AC variable frequency drive manufactured by Danfoss and assigned to the VLT FC 302 Automation Drives series. By converting constant-frequency mains power into a pulse-width-modulated output, the drive allows control systems to adjust motor torque and speed according to real-time process demands. It is suitable for industrial automation applications that require controlled acceleration, stable operating speeds, or adjustable motor output. The drive can regulate equipment such as pumps, blowers, conveyors, and other motor-driven machinery.

Its continuous electrical capacity is rated at 5.5 kW, allowing it to operate medium-sized pumps or blowers. The input section accepts line voltages from 380–500 VAC, allowing direct connection to common industrial power grids without an autotransformer. Operation relies on three-phase power, which balances current draw across the supply conductors and supports steady motor operation. An integrated thermal sensor derates the inverter automatically when the ambient temperature exceeds the permitted limit, helping protect the power electronics from excessive heat. The chassis has an IP20 enclosure rating, which protects against accidental contact with live parts but requires installation inside a suitable cabinet. Standard metric openings in the housing accommodate the standard cable entries and provide organized access for power and control wiring.

The design does not include a brake chopper, so regenerative energy from rapid deceleration or overhauling loads must be managed by external equipment or avoided through the selected operating profile. Electromagnetic emission control is provided by an internal RFI Class A1/B (C1) filter, reducing conducted interference without requiring an additional filter module for compatible installations. User interaction takes place through the graphical local control panel, which displays operating parameters, status information, and fault codes on a backlit screen. The control electronics use an uncoated printed circuit board, making the drive appropriate for clean, temperature-controlled cabinets where moisture and corrosive contaminants are not present. The housing supports normal cabinet mounting for A, B, and C frames, with mounting points arranged for installation on an appropriate panel. The cabinet must provide adequate ventilation and clearance around the chassis so cooling air can pass across the heat sink during operation.