Product Description:

The FC-302P55KT6131N4641HXBGXXXXSXXXXAXBXCXXXXDX is an AC variable frequency drive manufactured by Danfoss within the VLT FC 302 Automation Drives series. The unit receives three-phase mains power, converts it into a controlled variable-frequency output, and supplies an induction motor with the voltage and frequency needed for the commanded operating point. This conversion enables precise adjustment of motor speed, acceleration, and braking without relying on mechanical throttling. In automated plants, the drive can regulate conveyors, centrifugal pumps, and material-handling fans in response to changing process demands. It can also receive commands from a programmable logic controller, allowing motor output to follow the requirements of the connected machinery.

The drive has a continuous output rating of 55 kW, which corresponds to 75 HP. It accepts three-phase power from industrial supply networks operating between 380 and 480 V. This input range supports direct connection to commonly used industrial mains systems when the installation meets the applicable electrical requirements. The internal platform code 302 places the unit within the FC 302 control platform and its common parameter structure. Its power capacity is suitable for motor-driven equipment that requires controlled speed changes, repeatable acceleration, and managed deceleration under normal operating loads.

The drive is configured with no category C1 filter, so an appropriate external filter may be required where category C1 electromagnetic compatibility limits apply. Filter selection should account for the installation environment, motor cable length, grounding arrangement, and applicable emission requirements. Wiring enters through standard cable entries designed for common metric gland plates, allowing the mains, motor, and control conductors to be routed into the enclosure. Proper gland selection helps secure the cables and maintain orderly separation between power and control wiring. The interface includes a standard language pack, which supplies the default multilingual text set for keypad menus and operating messages. This text support allows drive settings, operating values, and diagnostic messages to be viewed directly through the local control interface.