Product Description:

The FC-302P4K0T5P55H1XGXXXXSXXXXAXBXCXXXXDX is an AC variable frequency drive produced by Danfoss for the VLT FC 302 Automation Drives series. The unit converts a fixed-frequency supply into a pulse-width-modulated output that allows a connected controller to regulate motor speed and torque according to changing load demands. This control method supports applications such as automated conveyors, pumps, fans, and other continuous-duty machinery. Integrated power electronics, input filtering, and local controls provide the primary functions required to operate compatible induction motors from a standard industrial supply.

The inverter section delivers 4.0 kW of continuous motor power, which is equivalent to 5.0 HP for equipment sized within the drive’s operating range. The rectifier accepts 380–500 VAC from a three-phase power supply, allowing direct connection to common 400 V and 480 V industrial systems. A factory-installed Graphical Local Control Panel provides access to operating parameters, trend graphs, status information, and manual run controls. The display enables local monitoring when the drive is installed inside an accessible electrical enclosure. The drive does not include an integrated mains disconnect or upstream protection, so suitable protective devices must be installed separately. It also does not include a brake chopper, which means that applications requiring rapid deceleration must use an appropriate external braking arrangement. Expansion slots remain available for compatible control or communication modules when additional functions are required.

Electromagnetic interference is managed by an internal filter rated RFI Class A1/B (C1), helping the drive meet conducted-emission requirements when it is installed with suitable grounding and shielded wiring. Power and control conductors pass through standard cable entries, allowing conventional glands and strain-relief hardware to be used at the enclosure plate. The printed circuit boards do not have a protective conformal coating, so the drive should operate in a clean, dry enclosure that limits exposure to moisture, dust, and corrosive contaminants. Adjustable parameters begin at their factory-default values and can be changed through the local control panel or a connected automation system. The standard English language set is available for menus, alarms, and operating messages. Proper separation of power and signal wiring helps reduce electrical noise at low-level control terminals and supports stable motor regulation during operation.