Product Description:

The FC-302P4K0T5E20H2XGXXXXSXXXXAXBXCXXXXDX is an AC variable frequency drive produced by Danfoss for the VLT FC 302 Automation Drives series. It regulates motor speed in industrial automation systems that rely on controlled torque, stable process rates, and efficient use of electrical power. By adjusting output frequency and voltage, the drive allows a connected three-phase induction motor to accelerate smoothly, decelerate in a controlled manner, or hold a commanded speed under changing load conditions. Its enclosure-ready format makes it suitable for installation inside a control cabinet where the drive can operate as part of a PLC-based motion or process system.

Its continuous output capacity is 4.0 kW, and its nominal mechanical output is 5.0 HP. The converter accepts input power from 380 to 500 VAC and is built for three-phase power, which supports balanced operation on common industrial supply systems. The housing has an IP20 chassis design, so the unit is intended for cabinet installation rather than open mounting. This arrangement helps protect internal power electronics while keeping the drive accessible within enclosed control equipment. The model is supplied without a brake chopper, so braking energy must be handled by the standard drive configuration.

The drive includes an RFI filter to reduce conducted electrical noise on the line and motor connections. User interaction is provided through a detachable Graphical Local Control Panel, which shows operating status, alarms, and adjustable parameters on a backlit display with navigation keys. The circuit boards are not coated, making the unit better suited to clean cabinet environments than to areas with corrosive contamination or heavy moisture. Mechanical installation uses normal cabinet mounting for A, B, and C frames, which supports placement in standard enclosure layouts. Cable entry and control configuration remain standard, so the drive stays aligned with the base setup of this model.