FC-302P4K0T5E20H2BGXXXXSXXXXA4BXCXXXXDX Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-302P4K0T5E20H2BGXXXXSXXXXA4BXCXXXXDX is part of the VLT FC 302 Automation Drives series and is rated at 4.0 kW or 5.0 HP. It supports three phase power with a voltage range of 380 to 500 VAC and includes a brake chopper and an RFI filter. This drive features standard cable entries, a graphical local control panel, and an IP20 chassis protection level.
Internal Product Review
The FC-302P4K0T5E20H2BGXXXXSXXXXA4BXCXXXXDX is a Danfoss VLT FC 302 automation drive designed for three-phase power at 380-500 VAC. DeviceNet MCA 104 support and a graphical local control panel make commissioning and network integration especially efficient in cabinet-based systems. A built-in brake chopper adds useful motion-control capability, and the IP20/chassis construction remains a strong fit for protected industrial enclosures.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-302P4K0T5E20H2BGXXXXSXXXXA4BXCXXXXDX is a variable-frequency drive produced by Danfoss for the VLT FC 302 Automation Drives series. It installs in control cabinets where it modulates motor speed for conveyors, pumps, and fans used in automated processes. By converting fixed-frequency mains power into a pulse-width-modulated output, the drive supplies adjustable voltage and frequency to three-phase machines for accurate process regulation and lower energy use. This control method helps the connected motor respond smoothly to changing load conditions instead of running only at line frequency.
The drive carries a continuous rating of 4.0 kW, equivalent to 5.0 HP, making it suitable for medium-duty industrial applications. It accepts input between 380 – 500 VAC on a three-phase power supply, so it connects directly to common plant feeders. The enclosure has an IP20 / chassis rating, which provides finger protection and relies on the host panel for additional sealing. Parameters can be viewed and adjusted through the Graphical Local Control Panel, which presents data through the standard language pack. Cabinet-mount brackets for A, B, and C frames align with common panel layouts, and the standard cable entries support orderly routing of motor, supply, and control wiring. The printed circuit boards are not coated, so the installation area should remain free of conductive dust.
Network connectivity is provided by the A-Option card DeviceNet MCA 104, allowing cyclic process data exchange and diagnostics over CAN. This communication link allows the drive to exchange control data and status information with higher-level automation systems without separate analog signal wiring. Excess regenerative energy is dissipated through the integrated brake chopper, which helps protect the DC link during rapid deceleration cycles. An internal RFI filter attenuates high-frequency switching noise to help reduce conducted interference inside the cabinet.
