FC-302P4K0T5E20H1XXXXXXSXXXXA6BXCXXXXDX Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-302P4K0T5E20H1XXXXXXSXXXXA6BXCXXXXDX is part of the VLT FC 302 Automation Drives series and offers a power rating of 4.0 kW or 5.0 HP. It is designed for three phase power operation at 380 to 500 VAC and has an IP20 chassis protection level with a standard RFI filter. The drive features a normal cabinet mount for A, B, and C frames and includes CAN Open MCA 105 as its option A interface.
Internal Product Review
The FC-302P4K0T5E20H1XXXXXXSXXXXA6BXCXXXXDX is a Danfoss VLT FC 302 automation drive designed for three-phase power and 380 to 500 VAC service. A 4.0 kW output with IP20/chassis protection makes the unit especially well suited for clean cabinet installations. CAN Open MCA 105 support is a valuable addition for efficient automation integration.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-302P4K0T5E20H1XXXXXXSXXXXA6BXCXXXXDX is an AC variable-frequency drive manufactured by Danfoss for the VLT FC 302 Automation Drives series. It modulates the voltage and frequency of three-phase mains power to regulate induction motor speed, allowing precise process control in conveyors, pumps, and material-handling equipment across industrial automation. Analog and digital I/O on the main board accommodate local sensors, control signals, and relays without requiring separate interface hardware.
The inverter delivers continuous motor output of 4.0 kW, equivalent to 5.0 HP, so it supports midrange motion tasks without requiring an oversized cabinet. It accepts line supplies between 380–500 VAC, and its input section uses three-phase power, eliminating the need for external phase conversion. A chassis-mount enclosure rated at IP20 protects against accidental contact with live parts when the unit is installed in a ventilated control panel. Forced convection moves air through the heat sink fins to control operating temperature and maintain reliable thermal performance. An internal DC link helps the drive continue operating through short-duration voltage dips. Cable glands follow the drive’s standard entry pattern, allowing the mains, motor, and control wiring to enter the chassis in an organized arrangement.
An integrated RFI Class A1/B (C1) filter attenuates conducted electrical noise on the mains leads. System networking is available through the A-slot option card, which uses a CANopen MCA 105 interface to transfer setpoints and status words without additional gateways. The unit has no brake chopper, so an external dynamic braking module is required for rapid stops involving high-inertia loads. The uncoated printed circuit board is intended for clean, cabinet-mounted environments where humidity and airborne contaminants are limited. The chassis installation must provide adequate ventilation around the heat sink and maintain the required clearances for unrestricted cooling airflow. Proper separation of motor, mains, and signal cables also helps the integrated filter reduce electrical interference in connected control equipment.
