FC-302P4K0T5E20H1XXX Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-302P4K0T5E20H1XXX belongs to the VLT FC 302 Automation Drives series and delivers a power rating of 4.0 kW or 5.0 HP. It operates on three-phase power at 380 to 500 VAC, is cabinet mounted for A, B, and C frames, and has IP20 protection. The drive features an RFI Class A1/B filter and does not include an LCP or brake chopper.
Internal Product Review
The FC-302P4K0T5E20H1XXX is a Danfoss VLT FC 302 automation drive rated at 4.0 kW and 5.0 HP. Three-phase 380 - 500 VAC input supports dependable integration across standard industrial power systems. IP20/chassis protection and normal cabinet mounting make this drive a strong choice for clean panel-based automation.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-302P4K0T5E20H1XXX is a variable frequency drive manufactured by Danfoss within the VLT FC 302 Automation Drives series. By converting fixed-frequency mains power into a modulated output, this unit allows control systems to adjust the speed and torque of standard three-phase induction motors used in pumps, fans, and material-handling machines. It is intended for cabinet installation in industrial automation lines where electrical efficiency, compact size, and networked drive coordination are required. Its control architecture supports accurate motor regulation across changing process demands, including acceleration, steady operation, and controlled deceleration.
Rated for an input of 380–500 VAC with three-phase power, the drive draws energy directly from common industrial mains without additional transformers. Its motor output is rated at 4.0 kW, which corresponds to approximately 5.0 HP of mechanical shaft power when a compatible induction motor is connected. The chassis has an IP20 enclosure rating, providing protection against accidental finger contact with internal electrical components. Because the enclosure does not protect against dust or liquids, the drive must be installed inside a suitable closed cabinet. Standard cabinet-mount brackets for A, B, and C frames support secure installation and maintain the clearances needed for cooling airflow.
The drive has no brake chopper, so applications with substantial regenerated energy may require longer deceleration ramps or a compatible external regenerative solution. Conducted emissions are limited by an integrated RFI Class A1/B (C1) filter, which supports category C1 requirements for suitable low-voltage installations. The front of the drive includes no local control panel (LCP), so parameter entry and operating commands require a remote keypad, control terminals, or a supported communication network. The drive uses uncoated electronics, making protection from condensation, conductive dust, and corrosive airborne contaminants important. Cabinet ventilation and climate control should maintain suitable internal conditions while allowing heat to leave the enclosure. Proper cable separation and grounding also help the integrated filter limit conducted electrical noise in the connected system.
