Product Description:

The FC-302P4K0T5E20H1XGCXXXSXXXXAXBXCXXXXDX is a variable-frequency drive manufactured by Danfoss and supplied under the VLT FC 302 Automation Drives series. The unit forms the power stage between a three-phase supply and an AC induction motor, delivering a modulated output that allows precise speed and torque regulation. Within automated plants, it is used to trim pump curves, balance fan flow, and synchronize conveyor sections, reducing mechanical stress while supporting flexible process control commanded by PLCs or building management systems.

The inverter provides a continuous mechanical output of 5.0 HP, representing the maximum shaft power the connected motor can deliver under rated conditions. Its electrical capacity of 4.0 kW serves as the basis for cable sizing, thermal management, and fuse selection. The incoming supply must remain between 380–500 VAC; within this range, the converter rectifies and reinverts the energy without derating. The drive uses three-phase power, allowing it to connect directly to standard industrial feeders. The chassis has an IP20 chassis protection level, making live parts finger-safe when the drive is mounted inside a cabinet while allowing ventilation for heat dissipation.

Electromagnetic performance is improved by the integrated RFI Class A1/B (C1) filter, which attenuates conducted noise to help the cabinet meet light-industrial emission limits. A front-mounted graphical local control panel provides access to operating parameters, trend data, and fault logs without requiring external tools. The display and navigation controls allow local monitoring of drive status and adjustments to motor operation. The control board has a protective conformal coating that guards electronic components against moisture and airborne oil. This coating supports operation in industrial cabinets where contaminants could otherwise collect on exposed circuitry and interfere with electrical performance.