Product Description:

The FC-302P4K0T5131X7339H2BGXXXXSXXXXAXBXCXXXXDX is an AC variable frequency drive manufactured by Danfoss within the VLT FC 302 Automation Drives series. It converts fixed-frequency plant power into a controlled output so induction or permanent-magnet motors can operate at the commanded speed and torque. By replacing mechanical throttling with electronic regulation, the unit supports pumps, fans, and conveyors that require precise speed control and energy-efficient operation in industrial automation.

The inverter has a continuous power rating of 4.0 kW, which indicates the maximum power it can supply to the motor terminals during steady operation. This rating corresponds to 5.0 HP of shaft power for applications that use imperial units. The input section accepts line voltages from 380 – 500 VAC and requires three-phase power, allowing direct connection to common industrial mains without phase conversion or a step-down transformer. These electrical ratings affect motor selection and the sizing of cables and protective devices. The resulting thermal load must also be considered when arranging enclosure ventilation and determining the allowable ambient operating temperature.

The EMC configuration is identified as no C1 option, meaning that an internal filter for Category C1 environments is not installed. An external filter or another suitable mitigation method is therefore necessary when Category C1 conducted-emission control is required. The interface includes the Standard language set, providing access to the usual menu languages for drive configuration and operation. The unit belongs to the VLT AutomationDrive FC product group, which uses compatible option cards and cooling plates across supported configurations. Its controlled motor output allows operating speed and torque to be adjusted electronically in response to process commands, while the accepted mains range supports installation on widely used industrial power systems.