FC-302P3K7T2131B0305H2XGXXXXSXXXXAXBXCXXXXDX Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Danfoss FC-302P3K7T2131B0305H2XGXXXXSXXXXAXBXCXXXXDX is part of the VLT FC 302 Automation Drives series. It has a power rating of 3.7 kW and delivers 5.0 HP. The drive operates on 200 to 240 VAC with three phase power and is provided with a standard language pack.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-302P3K7T2131B0305H2XGXXXXSXXXXAXBXCXXXXDX is an AC variable-frequency drive produced by Danfoss for industrial motor control. It converts fixed-frequency mains power into a modulated output that allows a PLC to regulate the speed and torque of an induction motor. This capability supports conveyors, pumps, fans, and other process equipment that must adjust motor operation as production demands change. Serial or fieldbus commands from the plant controller provide the drive with speed references, operating instructions, and control data without requiring changes to the machine’s mechanical transmission.
The inverter has a continuous motor output rating of 3.7 kW, which corresponds to 5.0 HP. Its rectifier section accepts three-phase power, allowing connection to common industrial supply feeders. The permitted input range is 200–240 VAC, and the internal rectifier uses this supply to maintain the DC link required by the inverter stage. Pulse-width modulation then regulates the voltage and frequency delivered to the connected motor. The drive carries series identifier 302, which places it within the applicable FC 302 platform and its associated parameter structure. Proper upstream protection, conductor sizing, and grounding are required to support stable operation within the stated input range.
The ordering code belongs to the VLT AutomationDrive FC product group. It uses the standard Adaptation B configuration, so an application-specific adaptation card is not preinstalled. The configuration does not include a C1 option, and an external filter may therefore be necessary when the installation must satisfy Category C1 emission limits. The standard multilingual language set provides keypad access to parameter menus in the supported factory languages. Optional harmonic filters can be added when the incoming supply requires additional harmonic mitigation. Brake resistors or compatible network modules may also be selected when required by the motor load, braking cycle, or plant communication system.
