FC-302P3K0T5E20H2BGXXXXSXXXXAXBXCXXXXD0
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The FC-302P3K0T5E20H2BGXXXXSXXXXAXBXCXXXXD0 drive features a digital input resistance of 4 kΩ at 0-24 VDC, a continuous current rating of 7.2 Amps, and an IP20 protection rating. Part of the VLT AutomationDrive FC 302 series by Danfoss, it requires a three-phase mains supply of 380-500 V and operates within a temperature range of up to 45°C.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-302P3K0T5E20H2BGXXXXSXXXXAXBXCXXXXD0 is a dynamic frequency converter produced by Danfoss under the VLT HVAC product line. It features an advanced graphical local control panel, which provides the user robust options for quickly accessing commands, functions, and parameters. The GLCP is sectionalized into four functional groups, each having their own set of keys, parameters, LEDs, and purpose. The first part of the GLCP shows is dedicated to the status lines of the converter. Details such as the rpm, current, and frequency are all displayed on the first group. The second group consists of a set of menu keys, while the third group contains the navigation keys. Finally, the last group has all the operation keys and their respective indicator lights.
The FC-302P3K0T5E20H2BGXXXXSXXXXAXBXCXXXXD0 delivers a nominal shaft output of 3 kW (or about 4 hp) at permissible ambient conditions. With its powerful 302 drive, this frequency converter comes with an A2 enclosure with a protection rating of either IP 20 or IP 21. At most, the FC-302P3K0T5E20H2BGXXXXSXXXXAXBXCXXXXD0 can withstand the following continuous input and output currents: 6.5 A and 7.2 A, respectively. For less than 1 minute, the device can safely transmit an input and output current of 10.4 and 11.5 A, respectively.
As a variable frequency converter, the FC-302P3K0T5E20H2BGXXXXSXXXXAXBXCXXXXD0 requires at most 12 AWG motor and mains cables to operate safely. For its disconnect circuit, the maximum cable cross-section must be at most (10, 10, 12) AWG. Assuming rated load, the converter dissipates 116 watts and achieves 0.97 or 97% efficiency. Like all other FC-302 drives from Danfoss, the FC-302P3K0T5E20H2BGXXXXSXXXXAXBXCXXXXD0 has an energy efficiency class of IE2 and operates well at an ambient range of 32 deg F to 122 deg F.
Frequently Asked Questions about FC-302P3K0T5E20H2BGXXXXSXXXXAXBXCXXXXD0:
Q: What are the dimensions of the FC-302P3K0T5E20H2BGXXXXSXXXXAXBXCXXXXD0?
A: The FC-302P3K0T5E20H2BGXXXXSXXXXAXBXCXXXXD0 has the following dimensions: 268 x 130 x 205 mm, assuming an A2 enclosure.
Q: What voltage level for the digital inputs in the FC-302P3K0T5E20H2BGXXXXSXXXXAXBXCXXXXD0 corresponds to a low PNP signal?
A: For a low PNP signal to be registered, the voltage across the digital input must be below 5 VDC.
Q: What voltage level for the digital inputs in the FC-302P3K0T5E20H2BGXXXXSXXXXAXBXCXXXXD0 corresponds to a high PNP signal?
A: For a high PNP signal to be registered, the voltage across the digital input must be above 10 VDC.
Q: What voltage level for the digital inputs in the FC-302P3K0T5E20H2BGXXXXSXXXXAXBXCXXXXD0 corresponds to a low NPN signal?
A: For a low PNP signal to be registered, the voltage across the digital input must be above 19 VDC.
Q: What is the input resistance of the FC-302P3K0T5E20H2BGXXXXSXXXXAXBXCXXXXD0’s digital input terminal?
A: Each digital input terminal of the FC-302P3K0T5E20H2BGXXXXSXXXXAXBXCXXXXD0 has an input resistance of approximately 4 kilo ohms.
