Product Description:

The FC-302P3K0T5E20H1XXXXXXS001XAXBXCXXXXDX is an AC variable-frequency drive manufactured by Danfoss for the VLT FC 302 Automation Drives series. It converts fixed-frequency three-phase mains into a regulated output that lets automation controllers adjust induction motor speed to match process demand. By doing so, the unit supports energy-efficient operation of pumps, fans, conveyors, and general-purpose machinery across industrial plants.

The drive accepts input between 380 – 500 VAC, a range that aligns with industrial power networks and allows consistent performance without external transformers. Its inverter section delivers 3.0 kW of continuous power, equal to 4.0 HP at the shaft when a matching motor is connected. Designed for three-phase power, the converter balances current across all lines to support smooth motor operation. An enclosure rating of IP20 chassis means live parts are finger-safe when the unit is installed inside a control cabinet, although additional protection is needed where dust or moisture is present. The drive lacks a brake chopper, so applications with frequent stopping or short deceleration ramps require external braking hardware or adjusted ramp settings.

The unit uses a normal cabinet mount for A, B, and C frames, which supports panel installation within the supported frame group. Incoming and motor leads pass through standard cable entries that accommodate common metric glands, while control wiring connects on the front edge for accessible routing. The control boards are not coated, so the drive is better suited to clean environments without corrosive vapor or conductive contamination. Conducted emissions are limited by the built-in RFI Class A1/B (C1) filter, which helps reduce line interference and can remove the need for a separate external filter in many installations.