Product Description:

The FC-302P3K0T5E20H1XXX is an AC variable-frequency drive produced by Danfoss for the VLT FC 302 Automation Drives series. In automated plants, it receives fixed-frequency three-phase power and converts it to a pulse-width-modulated output, allowing it to regulate induction motor speed without mechanical throttling. By adjusting motor torque in real time, this drive supports energy-efficient control of pumps, fans, and conveyor modules used throughout industrial automation.

The inverter accepts line voltages between 380–500 VAC, allowing it to operate on standard low-voltage networks without step-down transformers. It is designed for three-phase power, so input current is shared evenly across all phases and harmonic distortion is reduced. Continuous electrical output is rated at 3.0 kW, which corresponds to a mechanical output of 4.0 HP when driving four-pole machines. The chassis has an IP20 protection rating, which guards against accidental finger contact but requires enclosure mounting in areas exposed to dust or moisture. An internal electromagnetic interference network classified as RFI Class A1/B (C1) suppresses conducted noise, helping the installation satisfy residential and light-industrial emission limits.

Mechanical installation uses normal cabinet mounting for A, B, and C frames, so mounting holes and airflow clearances align with other compatible units in the series. For applications that do not require rapid dissipation of kinetic energy, the model is supplied with no brake chopper and instead relies on controlled deceleration through the motor. The uncoated printed circuit boards require the drive to be installed in a clean, dry cabinet that is free from condensation and corrosive gases. A local control panel is not fitted, so parameter changes are performed through remote keypads or fieldbus adapters. Safe Stop is achieved through external contactors when required by the application.