Product Description:

The FC-302P30KT5E21H1XGXXXXSXXXXA0BXCXXXXDX is an AC variable-frequency drive manufactured by Danfoss for the VLT FC 302 Automation Drives series. It regulates the speed of three-phase induction motors, allowing automation systems to adjust motor torque in response to real-time load demands. This control can reduce energy consumption in industrial conveyors, mixers, and pump stations. The drive accepts mains power within the 380–500 VAC range, enabling direct connection to common industrial power grids.

This model delivers a continuous output of 30 kW, indicating the electrical power that the inverter can supply to the motor without derating. Operation is based on three-phase power, which supports standard plant wiring and balanced power distribution. The same output rating corresponds to 40 HP for applications that use imperial units. The enclosure carries an IP21 / Type 1 rating, providing protection against finger contact and vertically dripping water. The drive should be installed in a clean electrical room or another protected indoor location that is appropriate for this enclosure rating.

The communications slot contains a PROFIBUS DP V1 MCA 101 fieldbus module, which provides cyclic process-data exchange and diagnostic access through existing PROFIBUS networks. Parameter entry and local diagnostics are handled through a graphical Local Control Panel. The panel displays real-time speed, current, and alarm information without requiring external tools. Conducted emissions are limited by an integrated RFI Class A1/B (C1) filter, helping the installation meet applicable residential and light-industrial electromagnetic compatibility limits. The electronics use an uncoated PCB, so the drive should remain in an environment free from corrosive vapors and excessive airborne contamination. Standard cable entries are provided, while the B, C0, C1, and D option slots are unpopulated. The selected configuration does not include additional mains equipment or brake chopper hardware.