FC-302P2K2T5E20H2BGXXXXS067XAXBXCXXXXDX Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-302P2K2T5E20H2BGXXXXS067XAXBXCXXXXDX is part of the VLT FC 302 Automation Drives series and features a power rating of 2.2 kW and 3 horsepower. It operates on three phase power at 380 to 500 VAC and comes with an integrated brake chopper and RFI filter. The drive has a protection level of IP20 and includes a graphical local control panel.
Internal Product Review
The FC-302P2K2T5E20H2BGXXXXS067XAXBXCXXXXDX is a Danfoss VLT FC 302 automation drive rated for 2.2 kW and 380 - 500 VAC service. A graphical local control panel simplifies commissioning, while the integrated brake chopper adds practical braking capability for dynamic machine duty. IP20/chassis protection supports clean cabinet integration, making the unit a well-balanced choice for industrial motion and process control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-302P2K2T5E20H2BGXXXXS067XAXBXCXXXXDX is an AC variable frequency drive manufactured by Danfoss for the VLT FC 302 Automation Drives series. The unit converts fixed-frequency power into a variable-frequency output for closed-loop control of induction motor speed. It is suitable for motor-driven equipment used in conveyors, pumps, ventilation systems, and automated production lines. The drive adjusts its electrical output in response to control commands, allowing connected machinery to operate across the required speed range.
The drive accepts a mains voltage of 380–500 VAC, allowing direct connection to common industrial networks within that range. Its continuous shaft output is rated at 2.2 kW, which corresponds to a motor output of 3.0 HP. A three-phase power input balances current across the incoming phases and reduces uneven loading on the supply. The IP20 chassis enclosure leaves the heat sink exposed to the control cabinet interior, so the cabinet must provide suitable protection and ventilation. Standard A, B, or C frame mounting patterns support panel installation, while metric cable entries accommodate power and control wiring. An integrated radio-frequency interference filter suppresses conducted emissions from the drive. The brake chopper manages regenerated energy during rapid motor deceleration, and the standard configuration does not include option modules in the A, B, C1, or D slots.
Drive settings and operating values are accessed through the Graphical Local Control Panel, which provides real-time information and guided setup menus. The built-in Integrated Motion Control function allows the unit to perform positioning sequences without a separate motion controller. The drive uses uncoated circuit boards, so it should be installed in a dry cabinet where condensation and corrosive airborne contaminants are controlled. A standard language pack supports the available interface menus, while the No Mains Option configuration permits selection of an external line reactor when required by the installation. The internal designation Series 302 identifies its place within the VLT AutomationDrive FC platform and corresponds to the parameter structure used by this model.
