Product Description:

The FC-302P2K2T5E20H1BXXXXXSXXXXALBXCXXXXD0 is a variable frequency drive manufactured by Danfoss for the VLT FC 302 Automation Drives series. As a cabinet-mounted inverter, it converts fixed mains power into a controlled output that allows industrial controllers to adjust motor speed and torque on conveyors, pumps, and similar machinery. By providing electronic speed regulation, the unit helps reduce mechanical strain and improve process efficiency in automated production lines.

It supplies a continuous mechanical output of 2.2 kW, which corresponds to 3.0 HP for users who reference imperial units. The input section accepts 380–500 VAC from a three-phase power supply, allowing direct connection to common industrial feeders without additional transformers. The IP20 chassis enclosure makes live parts finger-safe inside control cabinets, but the drive still requires cabinet protection from dust and adequate ventilation. Standard cabinet-mount provisions for A, B, and C frames simplify installation alongside other FC-series equipment. Its printed circuit boards are supplied uncoated, so the cabinet must remain dry and free of corrosive vapors. Because no LCP keypad is fitted, parameter entry is performed through external software or the fieldbus.

For braking demands during rapid deceleration, the integrated brake chopper routes excess energy to external resistors instead of feeding it back to the mains. The communication slot is populated with a PROFINET MCA 120 module, providing real-time Ethernet connectivity for parameter access and drive commands. A built-in MCB-107 24 V DC backup board keeps the control electronics powered when the primary supply is lost, maintaining fieldbus presence and alarm history. Electromagnetic interference is limited by the factory-installed RFI Class A1/B (C1) filter, which meets basic cabinet emission requirements. Wiring passes through standard cable entries, so no special gland plates are required during panel assembly.