FC-302P2K2T2131B0303H2XGXXXXSXXXXAXBXCXXXXDX Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The FC-302P2K2T2131B0303H2XGXXXXSXXXXAXBXCXXXXDX from Danfoss is part of the VLT FC 302 Automation Drives series. This drive supports a power rating of 2.2 kW (3.0 HP) and operates with three phase power at 200 to 240 VAC. It comes with a standard language pack and belongs to the VLT AutomationDrive product group.
Internal Product Review
The FC-302P2K2T2131B0303H2XGXXXXSXXXXAXBXCXXXXDX is a Danfoss VLT FC 302 automation drive with a 2.2 kW power rating for three-phase power. The 200 to 240 VAC mains range and 3.0 HP capacity make this drive an efficient choice for consistent industrial motor control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-302P2K2T2131B0303H2XGXXXXSXXXXAXBXCXXXXDX is an AC variable frequency drive produced by Danfoss for the VLT FC 302 Automation Drives series. Installed between a plant’s power supply and an induction motor, it converts constant-frequency power into a modulated waveform so a PLC can command speed, torque, and direction without mechanical throttling. By providing controlled acceleration, adjustable deceleration, and programmable setpoints, the unit helps reduce inrush current, lower energy consumption, and maintain stable process parameters in automated material-handling and fluid-moving equipment.
Its inverter stage supplies up to 2.2 kW of continuous output, matching small-frame motors used on packaging lines and light conveyors. For applications that use imperial units, this output corresponds to 3.0 HP. The input bridge accepts three-phase power and is rated for line conductors in the 200–240 VAC range, allowing direct connection to common low-voltage industrial networks. The series index 302 places the drive in the FC 302 platform, which uses a consistent parameter structure and keypad layout. Panel designs must account for the resulting heat dissipation and use suitable cable sizes and protective devices. These requirements help the power stage operate within its intended current and temperature limits during continuous motor control.
Expansion slot B has no adaptation, so the drive is supplied without an optional I/O module in that position. The conducted-emission hardware does not include the C1 option; an external filter is therefore required where category C1 compliance is necessary. Menu text is supplied with the Standard language pack, which provides multilingual navigation for drive setup, parameter changes, and diagnostic review. The available menus organize motor data, acceleration profiles, control modes, and fault information within the drive interface. Compatible communication adapters can connect the drive to supported industrial control networks when the application requires remote commands or status reporting.
