FC-302P22KT5E55 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-302P22KT5E55 is part of the VLT FC 302 Automation Drives series and is rated for 22 kW or 30 HP of output. This drive operates with a mains voltage range of 380 to 500 VAC on three phase power and provides an IP54/Type12 N3R protection level.
Internal Product Review
The FC-302P22KT5E55 is a Danfoss VLT FC 302 automation drive suited for demanding industrial control applications. With a 22 kW power rating and 380 to 500 VAC mains voltage, the drive delivers confident performance across standard three-phase installations. IP54/Type 12 N3R protection adds excellent application flexibility and stands out as a key advantage.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-302P22KT5E55 variable frequency drive is produced by Danfoss and belongs to the VLT FC 302 Automation Drives series. It converts fixed-frequency mains power into a controllable output, allowing plant controllers to adjust induction motor speed according to real-time demand without mechanical throttling. This capability supports conveyors, pumps, and ventilation equipment that require closed-loop torque regulation within industrial automation systems. Adjustable motor control can also reduce unnecessary energy use when equipment operates below its maximum speed or load. The drive receives commands from the connected control system and regulates its output to maintain the requested motor performance.
The drive provides a continuous output power of 22 kW under normal thermal conditions. This capacity is equivalent to 30 HP for machinery rated in imperial units. The input section accepts line voltages from 380–500 VAC, covering common 400 V and 480 V industrial power systems without requiring a transformer. The drive uses three-phase power, which distributes current across all three input conductors and supports stable operation with compatible industrial motors. Its enclosure carries ratings of IP54, Type 12, and NEMA 3R, providing protection against dust, limited water spray, and exposure in sheltered outdoor locations. These enclosure protections help isolate the internal power electronics from airborne contaminants and moisture while allowing installation near the controlled equipment.
Built-in application macros provide preset configurations for pump, fan, and conveyor operation through the drive keypad. The flying start function allows the drive to detect the speed and direction of a rotating motor before applying controlled output, which can reduce mechanical stress during restart events. The automatic energy optimization function adjusts motor excitation according to the operating load, helping limit excess energy consumption during partial-load operation. Parameters can be copied between compatible drives through Danfoss engineering software, making it easier to maintain consistent operating settings across similar machines. The standard power stage and control board support these functions while continuing to regulate motor torque, speed, and output frequency in response to commands from the automation controller.
