FC-302P22KT5E20H1XGCXXXSXXXXAXBXCXXXXDX Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-302P22KT5E20H1XGCXXXSXXXXAXBXCXXXXDX is a 30 horsepower automation drive from the VLT FC 302 Automation Drives series. It operates on three-phase 380–500 VAC power and offers a power rating of 22 kW, featuring an IP20 chassis protection level and RFI Class A1/B filter. The drive comes with a graphical local control panel, standard cable entries, and is designed for normal cabinet mounting with a coated PCB.
Internal Product Review
The FC-302P22KT5E20H1XGCXXXSXXXXAXBXCXXXXDX is a Danfoss VLT FC 302 automation drive rated for 22 kW on 380 - 500 VAC systems. The graphical local control panel supports efficient commissioning, and the coated PCB adds durability for cabinet-mounted service. IP20 / Chassis protection with an RFI Class A1/B (C1) filter makes this drive a strong choice for dependable automation performance.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-302P22KT5E20H1XGCXXXSXXXXAXBXCXXXXDX is an AC variable frequency drive produced by Danfoss within the VLT FC 302 Automation Drives series. The unit converts fixed-frequency mains power into a variable-frequency output, allowing a PLC or other control system to regulate the speed and torque of an induction motor. Installed inside a control cabinet, it acts as the power-control interface between the plant supply and motor load in conveyors, pumps, and material-handling systems.
This model accepts a three-phase supply of 380–500 VAC, making it suitable for common industrial distribution systems. It supports a continuous motor output of 22 kW, which corresponds to 30 hp. The inverter bridge is designed for balanced operation with three-phase power. Heat dissipation and conductor routing follow cabinet-mount requirements for the applicable frame, while the IP20 chassis protects against accidental contact with hazardous internal parts. The open chassis requires installation in a suitable enclosure that provides the necessary protection from dust, moisture, and other contaminants. Because the drive has no brake chopper, regenerative energy produced during rapid deceleration must be managed by compatible external equipment when the application requires dynamic braking.
Operator interaction is provided through a graphical local control panel, which gives direct access to operating values, status information, and adjustable parameters without requiring a separate programming device. Conducted electrical noise is reduced by an integrated RFI Class A1/B (C1) filter, supporting installation in machinery that must comply with the applicable C1 emission limits. The drive uses coated printed circuit boards to protect its electronics from humidity and airborne contaminants. Standard cable entries support orderly routing of mains, motor, and control conductors inside the cabinet. The baseline configuration leaves the accessory slots available for compatible communication, feedback, or control modules when additional functions are needed. Proper enclosure ventilation must maintain acceptable operating temperatures around the chassis while allowing heat to move away from the power electronics.
