FC-302P22KT2131L7901H2BGXXXXSXXXXAXBXCXXXXDX Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-302P22KT2131L7901H2BGXXXXSXXXXAXBXCXXXXDX is part of the VLT FC 302 Automation Drives series and is designed for three phase power with a voltage range of 200 to 240 VAC. This drive supports a power rating of 22 kW and a maximum of 30 horsepower.
Internal Product Review
The FC-302P22KT2131L7901H2BGXXXXSXXXXAXBXCXXXXDX is a Danfoss VLT FC 302 automation drive with a 22 kW rating and 30 HP capacity. A 200 to 240 VAC mains input and three-phase power configuration make this unit a strong fit for demanding automation installations.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-302P22KT2131L7901H2BGXXXXSXXXXAXBXCXXXXDX is an AC variable frequency drive produced by Danfoss for the VLT FC 302 Automation Drives series. It converts fixed-frequency mains power into a modulated three-phase output for regulating the speed and torque of compatible induction motors. This control method allows a connected motor to respond to changing process demands in material-handling lines, pump stations, and conveyor systems. The drive can support controlled starts, stops, and speed changes without requiring mechanical methods of output regulation.
The inverter provides a continuous mechanical output of 22 kW (30 HP), making it suitable for equipment with moderate shaft-power requirements. Its input section accepts 200–240 VAC and operates with three-phase power, allowing connection to common low-voltage industrial distribution systems. Protective devices, conductors, and disconnecting equipment should be selected according to the connected motor load and applicable installation requirements. The control platform includes adaptive acceleration ramps, which can regulate changes in motor speed to reduce abrupt mechanical loading during starts and transitions. It also provides built-in PID control for applications that use process feedback to regulate variables such as pressure, flow, or speed.
The internal control board uses the series design code 302, and its parameter structure is consistent with related models in the same drive platform. This arrangement provides access to operating parameters for motor control, ramp behavior, process regulation, and drive protection. The configuration has no integrated C1 option, so an appropriate external electromagnetic compatibility filter is required when Category C1 emission limits must be met. Filter selection and installation should account for cable length, grounding, motor characteristics, and the electromagnetic conditions at the installation site. The Standard language pack provides multilingual menu support through the front keypad, allowing operating values, parameter names, and diagnostic messages to be viewed in supported languages.
