Product Description:

The FC-302P1K5T5E20H2XGCXXXSXXXXAXBXCXXXXDX is an AC variable-frequency drive produced by Danfoss for the VLT FC 302 Automation Drives series. It converts fixed-frequency mains power into a regulated output so control systems can adjust induction motor speed and torque for conveyors, pumps, and fans without mechanical throttling. By combining the power stage and control electronics in one chassis, the unit matches motor output to process demand while helping protect the connected motor. This arrangement supports steady operation in applications where load conditions change during normal use.

The drive supplies a continuous output of 1.5 kW, which is the maximum inverter load it can support without derating. In imperial terms, that capacity equals 2.0 HP. It is designed for 380 – 500 VAC networks, allowing connection to common industrial power systems. The unit uses three-phase power, which helps distribute current across the supply conductors. Its enclosure is rated IP20 / Chassis and is intended for installation inside a control cabinet where limited touch protection is acceptable. This cabinet-mounted format suits installations that keep the drive inside a protected electrical enclosure.

The electronics use a coated printed circuit board, which adds protection against moisture in humid cabinets. A factory-installed RFI filter reduces conducted emissions so the drive can operate near sensitive equipment with less electrical interference on shared wiring. Local setup and monitoring are handled through the Graphical Local Control Panel, which provides an accessible interface at the front of the unit. The unit is identified as series 302. The drive is supplied without a brake chopper, and the A, B, C0, C1, D, and mains expansion slots are left empty. This layout leaves space for separately selected options when application-specific interfaces are required.