Product Description:

The FC-302P1K5T5E20H1XGXXXXSXXXXALBXCXXXXDX is a variable frequency drive manufactured by Danfoss for the VLT FC 302 Automation Drives series. The unit controls the speed of three-phase induction motors by converting fixed-frequency mains power into a regulated output, which supports energy-efficient operation in pumps, fans, and conveyors used in industrial automation. As a cabinet-mounted chassis device, it fits low-voltage panels and can communicate with plant controllers through optional fieldbus hardware. Its design emphasizes straightforward installation and parameter continuity across the 302 platform.

The drive uses three-phase power, so it connects directly to common industrial feeders without requiring phase conversion. It accepts a mains range of 380 - 500 VAC, allowing operation on both 400 V and 480 V systems. Continuous motor output is rated at 1.5 kW, which is equivalent to 2.0 HP for small motor loads. Network communication can be added through the optional PROFINET MCA 120 module, which exchanges process data over Ethernet with PLCs. Local setup is handled through a Graphical Local Control Panel that shows parameters and alarm codes. This interface also provides quick-menu access for repeated adjustments, while dynamic braking requires an external solution because no internal brake chopper is included.

The enclosure has an IP20 / Chassis rating, so the unit is finger-safe but still requires installation inside a protective cabinet where dust or moisture may be present. Conducted emission control is supported by the built-in RFI Class A1/B (C1) filter, which helps the installation meet residential and light-industrial EMC limits without extra line accessories. The printed-circuit boards are not coated, so clean and dry airflow inside the enclosure is important during operation. Standard cable entries, normal A-C frame mounting plates, and the absence of adaptation or mains options keep the physical layout consistent with other 302 units.