Product Description:

The FC-302P1K5T5E20H1BXXXXXSXXXXA0BXCXXXXD0 is an AC variable frequency drive produced by Danfoss for the VLT FC 302 Automation Drives series. This inverter converts fixed-frequency three-phase mains power into a modulated output that lets process controllers regulate the speed and torque of induction motors. By matching motor speed to the load, the unit coordinates conveyors, pumps, and fans in industrial automation lines while reducing mechanical wear and energy consumption.

Its continuous output is rated at 1.5 kW, which indicates the electrical power the inverter can supply to the motor terminals during steady operation. The corresponding mechanical output is 2.0 HP. The input section accommodates line voltages from 380 to 500 VAC, enabling direct connection to common industrial distribution networks without step-down transformers. Because it is designed for a three-phase power supply, the drive maintains balanced loading across the supply conductors and minimizes harmonics compared with single-phase equipment. The drive has an IP20 chassis, so it must be installed inside a cabinet that protects the electronics from dust and accidental contact.

The integrated fieldbus card is a PROFIBUS DP V1 MCA 101 interface, allowing cyclic data exchange with PLCs for parameter access and real-time setpoints. For rapid deceleration or emergency stops, the built-in brake chopper directs excess regenerative energy to an external resistor rather than allowing it to remain on the DC bus. Control power resilience is improved by the MCB-107 24 V DC backup module, which keeps logic circuits active during short mains interruptions so process data is retained. Electromagnetic interference is limited by the factory-installed RFI Class A1/B (C1) filter, helping the installation meet conducted emission limits across the 0.15–30 MHz frequency band.