FC-302P1K5T4Z20H3B Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The FC-302P1K5T4Z20H3B is an automation drive manufactured by Danfoss as part of the VLT FC 302 Automation Drives series. It provides a power rating of 1.5 kW and operates with three-phase power, delivering up to 2.0 HP and an output current of 4.1 A at 380-440 V. The drive features IP21 protection, an integrated H3 EMC filter, and a maximum output frequency of 590 Hz.
Internal Product Review
The FC-302P1K5T4Z20H3B is a Danfoss VLT FC 302 automation drive with a 1.5 kW rating and three-phase power input. High 0.97 efficiency and an integrated H3 EMC filter support clean, efficient operation in automation panels. A 160% starting torque for 60 s makes the unit especially appealing for demanding load starts.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-302P1K5T4Z20H3B variable-speed drive is produced by Danfoss for the VLT FC 302 Automation Drives series. It modulates the voltage and frequency of three-phase mains power so that induction or permanent-magnet motors can be accelerated, decelerated, or held at a precise setpoint without mechanical throttling in pumps, fans, and conveyor systems. By integrating process-specific parameters and fieldbus options, the controller serves as a compact drive stage in distributed industrial automation cabinets.
At 400 V, the inverter has an apparent power rating of 2.8 kVA, and its continuous output is rated at 1.5 kW, equivalent to 2.0 HP at the shaft. With a three-phase input of 380–440 V, it draws 3.7 A and can deliver an output current of 4.1 A to the motor terminals. Full-load efficiency reaches 0.97, limiting thermal losses to 62 W that must be removed by airflow through the control cabinet. A built-in brake chopper helps dissipate regenerated energy during rapid deceleration. The H3 integrated EMC filter attenuates conducted emissions to meet industrial limits, while energy efficiency class IE2 supports compliance with regional requirements. Flux-mode operation maintains field orientation up to 300 Hz. Starting torque remains at 160% for 60 seconds to overcome static friction during heavy-load starts.
The drive supports continuous operation at ambient temperatures up to 45 °C without derating and maintains rated performance at altitudes up to 1000 m. Output frequency can be expanded to 590 Hz for high-speed spindles, and shielded motor cable runs may extend to 150 m while retaining full EMC compliance. The enclosure meets IP21, protecting the electronics against solid objects larger than 12.5 mm and vertically dripping water when the drive is installed in its intended orientation.
