Product Description:

The FC-302P1K1T5E20H2XXXXXXSXXXXALBXCXXXXDX is a variable-frequency drive built by Danfoss for the VLT FC 302 Automation Drives series. Designed for cabinet integration, it converts fixed-frequency mains power into regulated voltage and frequency for motor-driven pumps, fans, conveyors, and other material-handling equipment. The drive regulates motor speed and torque according to process demand, reducing the need for mechanical flow or speed controls. Its FC 302 platform supports standard automation functions and common control interfaces for coordinated operation with industrial control systems.

The inverter provides a continuous motor output of 1.1 kW, which corresponds to 1.5 HP. It accepts an input supply ranging from 380 to 500 V AC and is intended for three-phase power networks. The chassis supports cabinet installation using the applicable A, B, or C frame arrangement. Its IP20 chassis protection guards against accidental finger contact while allowing ventilation through the enclosure. A PROFINET MCA 120 communication board occupies the A slot and provides deterministic Ethernet communication with compatible PLCs. Adaptation B is set to no adaptation, and the B slot does not contain an additional option board.

The drive does not include a brake chopper, so an external arrangement is required when the application must dissipate regenerated energy during rapid deceleration. The C0, C1, and D option positions are unused, and standard cable entries support routing through the cabinet gland plate. The unit includes the standard language pack but does not have an LCP keypad or a dedicated mains disconnect. Its circuit boards are not conformally coated, so the installation must remain within the permitted humidity and contamination limits. An integrated RFI filter suppresses conducted electromagnetic interference on the mains connection. Control software extensions are not installed, leaving the drive with its standard motion-control functions and parameter set.