Product Description:

The FC-302P1K1T5E20H2BXXXXXSXXXXANBXCXXXXDX variable frequency drive is produced by Danfoss and supplied in the VLT FC 302 Automation Drives series. This cabinet-mounted unit converts fixed mains power into a modulated output that lets controllers vary induction motor speed in conveyors, pumps, and other continuous-duty machinery. Its compact frame is intended for installation in electrical panels where precise speed regulation, torque limiting, and energy savings are required. By adjusting output frequency and voltage, it helps match motor operation to changing process demand instead of forcing the motor to run at full speed at all times.

Electrical parameters place the drive on networks from 380–500 VAC. It uses a three-phase power input and can deliver up to 1.1 kW of continuous output, which is equivalent to 1.5 HP at the motor shaft. The enclosure has an IP20 / Chassis rating, so it is intended for mounting inside a protective cabinet rather than for exposed use. Standard cable entries simplify wiring, and the printed circuit boards are not coated, so ambient humidity should be controlled. Because the chassis form is open to the cabinet environment, the surrounding enclosure is responsible for touch protection and managed airflow.

Control and braking functions are centered on the installed EtherNet/IP MCA 121 module, which provides high-speed cyclic data exchange with a PLC. An integrated brake chopper supports an external resistor for dissipating regenerated energy during rapid deceleration. Conducted interference is reduced by the built-in RFI filter, helping the drive operate in applications that require low electrical noise. The series identifier is 302, and the front panel LCP is omitted, so settings are transferred through the network. This arrangement allows centralized command and status exchange without relying on a local operator panel.