Product Description:

The FC-302P1K1T5E20H1XGXXXXSXXXXA0BXCXXXXDX is an AC variable frequency drive produced by Danfoss within the VLT FC 302 Automation Drives series. As a drive, it converts fixed-frequency mains power into a regulated output that lets controllers adjust induction-motor speed in conveyors, pumps, and material-handling lines. This arrangement allows the connected motor to follow process demand more closely during routine operation, which supports stable speed control when load conditions change.

The unit delivers a continuous mechanical output of 1.1 kW or 1.5 HP, matching small and medium frame motors used in auxiliary machine axes. It accepts 380 – 500 VAC from a three-phase power supply, so it connects directly to standard industrial feeders without a step-down transformer. Its enclosure classification is IP20 / chassis, which is suited for installation inside a protected control cabinet rather than direct exposure on the machine. Normal cabinet-mount A, B, and C frames support vertical airflow paths commonly used in MCC bays, and the integrated Class A1/B radio-frequency filter helps limit conducted emissions toward nearby instrumentation.

Control integration is supported by the embedded RFI Class A1/B (C1) filter and a Graphical Local Control Panel that shows status, alarms, and parameter groups without external software. For fieldbus communication, the A-slot contains PROFIBUS DP V1 MCA 101, which provides deterministic cyclic data exchange with PLCs and supports coordinated operation with higher-level control systems. The power board is not coated, so the drive is intended for clean, temperature-controlled enclosures. Standard cable entries align with metric gland plates used in automation cabinets, and a brake chopper is not present, so dynamic braking energy must be absorbed by motor losses or an external resistor when high-inertia loads decelerate.