Product Description:

The FC-302P1K1T5E20H1BGXXXXSXXXXAXBXCXXXXDX is a VLT FC 302 Automation Drives inverter manufactured by Danfoss. It converts fixed-frequency mains power into a variable-frequency output so motors can run at speeds matched to the load in pumps, fans, and material-handling systems. In automated equipment, the inverter adjusts motor frequency and voltage so driven components can respond more accurately to changing flow, airflow, or conveying demands. The unit is intended for installation in a standard control cabinet and uses an integrated graphical interface for local setup, monitoring, and adjustment of operating values.

The drive accepts an input of 380 – 500 VAC on three-phase power lines and supplies up to 1.1 kW, or about 1.5 HP, of adjustable motor output. This output class suits smaller motor loads that still require precise speed control from an upstream PLC or automation system. An integrated brake chopper routes surplus DC-link energy into a braking resistor during deceleration, which helps manage overvoltage during rapid speed changes. The enclosure has an IP20 / Chassis rating for cabinet installation, and the built-in RFI Class A1/B (C1) filter reduces conducted emissions without requiring additional line-side hardware. Standard cable entries and cabinet mounting arrangements help the drive fit common panel layouts.

Operator interaction is handled through the Graphical Local Control Panel, which is supported by the standard language pack for on-unit navigation and parameter access. This front interface allows direct viewing of operating values, alarms, and parameter groups without adding a separate display device. The control electronics use a not coated board, which is suited to clean cabinet installations where added protective coating is not required. The unit is identified as Series 302, and the brake-safe circuitry remains active within the stated power class.