FC-302P1K1T5E20H1BGCXXXSXXXXALBXCXXXXD0
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The FC-302P1K1T5E20H1BGCXXXSXXXXALBXCXXXXD0 is a durable drive with an IP20 protection rating and a shaft output of 1.1 kW. Manufactured by Danfoss, this unit is part of the VLT AutomationDrive FC 302 series and features a set of programmable digital inputs. It also includes an absolute encoder for feedback sensing.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-302P1K1T5E20H1BGCXXXSXXXXALBXCXXXXD0 is one of Danfoss’ high-performing frequency converters designed for three-phase AC motors. Featuring a powerful 302 drive, this converter uses various types of control principles such as voltage vector control, U/f special mode, and flux vector mode. With its efficient construction and design, the FC-302P1K1T5E20H1BGCXXXSXXXXALBXCXXXXD0 can easily handle squirrel cage induction motors and permanent magnet synchronous motors. Because this adjustable drive supports different control principles, it is suitable for the most versatile and demanding applications. In high-overload mode, this device can achieve a typical shaft rating of 1.1 kilowatts or 1.5 hp. To operate at nameplate ratings, the converter must be connected to a three-phase voltage supply (380-500 V).
FC-302P1K1T5 converters from Danfoss come in different types of enclosures. Converters equipped with an E20 enclosure, such as the FC-302P1K1T5E20H1BGCXXXSXXXXALBXCXXXXD0 have a protection category of IP 20 and dimensions of 268 x 90 x 205 mm. It weighs about 4.9 kilograms and draws a continuous input current of 2.7 amperes. For less than a minute, the converter can safely draw a current of 4.3 amperes from its input side, assuming favorable ambient conditions. At the converter’s rated maximum load, the total power loss equates to 58 watts at 96% efficiency.
Based on FC-302P1K1T5E20H1BGCXXXSXXXXALBXCXXXXD0’s official documentation, the recommended cable cross-section for the motor and mains wiring must be at most 4 square millimeters. To ensure the stable operation of this variable converter, the ambient temperature must not exceed an average temperature of 45 degrees Celsius for 24 hours of operation. Depending on the mode selected, the motor output frequency delivered by this device may vary. For standard mode, however, the output motor frequency is usually between 0 and 590 hertz.
Frequently Asked Questions about FC-302P1K1T5E20H1BGCXXXSXXXXALBXCXXXXD0:
Q: How long is the torque rise time during the flux mode of the FC-302P1K1T5E20H1BGCXXXSXXXXALBXCXXXXD0?
A: During the flux mode of the FC-302P1K1T5E20H1BGCXXXSXXXXALBXCXXXXD0, the average torque rise time is 1 ms for 5 kHz fsw.
Q: How long is the torque rise time during the voltage vector control mode of the FC-302P1K1T5E20H1BGCXXXSXXXXALBXCXXXXD0?
A: Using the voltage vector control mode of the FC-302P1K1T5E20H1BGCXXXSXXXXALBXCXXXXD0, the average torque rise time is 10 ms.
Q: How much variable torque can the FC-302P1K1T5E20H1BGCXXXSXXXXALBXCXXXXD0 achieve?
A: For the motor connected to the FC-302P1K1T5E20H1BGCXXXSXXXXALBXCXXXXD0, the variable torque can go as high as 110% of the nominal value.
Q: How much starting torque can the FC-302P1K1T5E20H1BGCXXXSXXXXALBXCXXXXD0 achieve?
A: For the motor connected to the FC-302P1K1T5E20H1BGCXXXSXXXXALBXCXXXXD0, the starting torque can peak at 160% of the nominal value.
Q: How many digital inputs does the FC-302P1K1T5E20H1BGCXXXSXXXXALBXCXXXXD0 contain?
A: The FC-302P1K1T5E20H1BGCXXXSXXXXALBXCXXXXD0 contains a total of six digital inputs, two of which are programmable as outputs.
