Product Description:

The FC-302P1K1T5131B0415H2XGXXXXSXXXXAXBXCXXXXDX is a variable frequency drive manufactured by Danfoss and supplied under the VLT FC 302 Automation Drives series. It converts fixed-frequency three-phase mains power into a pulse-width-modulated output, allowing controllers to adjust induction motor speed in response to real-time loads. This closed-loop speed control can lower energy use and reduce mechanical wear in pumps, fans, conveyors, and other continuous-duty machines in automated plants. Its air-cooled chassis is designed for switchboard mounting and accommodates the mechanical accessories available for this drive platform.

The inverter supplies up to 1.5 HP of mechanical shaft power, corresponding to an electrical capacity of 1.1 kW. It accepts utility power from 380–500 VAC, allowing direct connection to common 400 V or 480 V industrial networks without an autotransformer. The drive uses three-phase power, which distributes rectifier current across the supply phases and reduces the load placed on each phase. The 302 platform provides a consistent parameter structure and diagnostic interface for compatible FC 302 drive configurations. Pulse-width modulation regulates the voltage and frequency delivered to the connected motor, supporting controlled acceleration, deceleration, and steady-speed operation. The drive can therefore respond to changing process demands without requiring mechanical throttling or other inefficient speed-control methods.

The drive is delivered with no installed adaptation, leaving specialized application functions available for later configuration when supported. Its built-in radio-frequency interference stage includes no C1 filter option, so additional filtering may be required where the strictest residential emissions limits apply. Interface text is supplied through the standard language pack, providing multilingual navigation without custom content files. The unit belongs to the VLT AutomationDrive FC product group, which uses compatible enclosure arrangements, cable entry locations, and optional communication slots across supported models. These physical arrangements help maintain orderly cable routing when multiple drive sizes are installed in the same control cabinet. Optional communication hardware can be placed in the available fieldbus locations when the application requires integration with a higher-level automation network.