FC-302P18KT5P20H1XGXXXXSXXXXAXBKCXXXXD0 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-302P18KT5P20H1XGXXXXSXXXXAXBKCXXXXD0 is part of the VLT FC 302 Automation Drives series and provides a power rating of 18.5 kW with a 25 HP output. This three-phase drive supports mains voltages from 380 to 500 VAC and features an MCB-101 general purpose I/O and an MCB-107 24V DC backup. It includes a graphical local control panel and is equipped with an RFI Class A1/B (C1) filter.
Internal Product Review
The FC-302P18KT5P20H1XGXXXXSXXXXAXBKCXXXXD0 is a Danfoss VLT FC 302 automation drive rated at 18.5 kW for three-phase power. A graphical local control panel and 380 - 500 VAC input support efficient commissioning and dependable integration in plant systems. The Class A1/B (C1) RFI filter is a strong advantage for clean, reliable automation drive performance.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-302P18KT5P20H1XGXXXXSXXXXAXBKCXXXXD0 is an AC variable frequency drive produced by Danfoss within the VLT FC 302 Automation Drives series. Positioned in the VLT AutomationDrive FC product group, it accepts industrial three-phase mains power and delivers regulated voltage and frequency to connected motors. The drive is used in automated material-handling, ventilation, and pumping systems where adjustable speed and torque can improve efficiency and protect mechanical components.
The electrical section is rated at 18.5 kW, which corresponds to a mechanical output of 25 HP when the connected motor is fully loaded. It connects directly to supply networks rated for 380–500 VAC and uses three-phase power, so no phase conversion hardware is needed. An integrated RFI Class A1/B (C1) filter limits conducted emissions in commercial installations. The printed circuit boards are not coated, so the drive should be protected from moisture and airborne contaminants. The drive does not include a brake chopper, which means external dynamic braking hardware is required when an application needs rapid deceleration. The series identifier 302 associates the unit with the mechanical platform used by other drives in the same product line.
Slot A does not contain an option card, and the adaptation field indicates that the unit has no application-specific adaptation. Slot B carries the MCB-101 general-purpose I/O board, which adds digital and analog signal connections, while slots C and C0 are vacant. The C1 EMC module is omitted, and the drive does not include a mains option filter. A standard cable-entry plate provides an organized route for wiring into the cabinet. Backup power for the control electronics is available through the MCB-107 24 V DC backup module, helping the control section remain active when its primary supply is interrupted. Local operation is handled through the Graphical Local Control Panel, which provides access to operating data, parameters, alarms, and status messages. Display messages use the standard language pack for menu navigation and drive configuration.
