FC-302P18KT5E55H1BGXXXXSXXXXA0B2CXXXXD0 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-302P18KT5E55H1BGXXXXSXXXXA0B2CXXXXD0 is part of the VLT FC 302 Automation Drives series and has a power rating of 18.5 kW and 25 HP. This drive operates on three phase power at 380 to 500 VAC and features PROFIBUS DP V1 communication and a 24V DC backup. It comes with IP54/Type12 N3R protection and includes a graphical local control panel.
Internal Product Review
The FC-302P18KT5E55H1BGXXXXSXXXXA0B2CXXXXD0 is a Danfoss VLT FC 302 automation drive rated at 18.5 kW. PROFIBUS DP V1 communication and a graphical local control panel make commissioning and networked control especially straightforward. IP54/Type 12 protection combined with a brake chopper makes the unit a strong choice for demanding industrial installations.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-302P18KT5E55H1BGXXXXSXXXXA0B2CXXXXD0 is an AC variable frequency drive manufactured by Danfoss and supplied in the VLT FC 302 Automation Drives series. It converts fixed-frequency plant power into a modulated output that lets controllers match motor speed to process demand, cutting energy use and mechanical stress. By varying output frequency and voltage, it helps motors start and run more smoothly in applications that do not need full speed at all times. The unit is intended for cabinet installation in automated material-handling, pumping, and ventilation equipment throughout industrial and commercial facilities.
Rated for 18.5 kW continuous output, the drive can deliver up to 25 HP to a connected induction motor. It accepts 380 – 500 VAC on a three-phase power supply, aligning with common industrial distribution networks. The enclosure carries an IP54/Type 12 N3R rating, protecting internal assemblies against dust and low-pressure water spray. A brake chopper diverts regenerated energy into a resistor during rapid deceleration to help manage braking loads. The drive uses standard cable entries and uncoated printed circuit boards for environments that do not demand high-humidity protection. No mains option is installed.
Field adaptability is provided through plug-in option modules that extend communication, protection, and backup functions. Slot A contains the PROFIBUS DP V1 MCA 101 interface for deterministic network control, while slot B holds the MCB-112 PTC Therm. Card that forwards motor temperature signals to the drive’s protection logic. In slot D, the MCB-107 24V DC backup board keeps the control circuitry energized during brief power loss, which helps preserve control operation during short supply interruptions. Conducted emissions are limited by the integrated filter that meets RFI Class A1/B (C1). Operators configure parameters with the graphical Local Control Panel, and the standard language pack presents menus in several major languages.
