Product Description:

The FC-302P18KT5E20H1XGXXXXSXXXXAXB2CXXXXDX is an AC variable frequency drive manufactured by Danfoss for the VLT FC 302 Automation Drives series. Within an automated installation, the drive modulates the frequency and voltage supplied to induction motors so that process speed can be matched to real-time demand. This type of control helps reduce abrupt speed changes and supports stable operation across common industrial processes. It is intended for general industrial duties that require precise motor control while fitting into standard cabinet layouts.

It delivers a continuous power output of 18.5 kW, which is equivalent to 25 HP. The input section is rated for 380–500 VAC on a three-phase power supply, so the inverter connects directly to industrial mains without external transformers. Cooling and clearance follow the normal cabinet mount A, B, and C frame guideline, and the open chassis has an IP20 chassis protection level that limits finger access but still requires enclosure mounting. Because a brake chopper is absent, deceleration energy must be absorbed by the motor or an external resistor. Safe stop is achieved electrically, and the base input arrangement is retained for the mains connection.

User interaction is provided through a graphical local control panel mounted on the drive face, and it uses the standard language pack for parameter navigation. For thermal supervision, the B option adds an MCB-112 PTC thermistor card. The remaining expansion slots are unassigned, so the configuration stays focused on operator access and motor temperature monitoring. The printed circuit boards are not coated, so the unit should be installed away from conductive dust or high humidity. Conducted emissions are reduced by an integrated RFI Class A1/B (C1) filter, and standard cable entries help keep wiring orderly inside the cabinet.