FC-302P15KT5E20H1XG Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-302P15KT5E20H1XG is a 20 HP automation drive with a power rating of 15 kW and operates on three phase power at 380 to 500 VAC. As part of the VLT FC 302 Automation Drives series, it features a graphical local control panel, normal cabinet mounting for A, B, and C frames, an IP20 chassis protection level, and an RFI Class A1/B (C1) filter.
Internal Product Review
The FC-302P15KT5E20H1XG is a Danfoss VLT FC 302 automation drive engineered for three-phase power at 380 to 500 VAC. The graphical local control panel supports efficient commissioning, and the IP20/chassis design suits protected cabinet installations. The 15 kW, 20 HP rating makes the unit a strong choice for controlled industrial drive applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-302P15KT5E20H1XG is an AC variable frequency drive manufactured by Danfoss for the VLT FC 302 Automation Drives series. The unit converts fixed-frequency line power into a controlled output waveform so production controllers can adjust motor speed, torque, and process throughput in real time. It is used in conveyor lines, centrifugal pumps, and material-handling stations where electronic regulation replaces mechanical dampers, valves, or pulleys. Its control system supports applications that require responsive speed changes and stable motor operation under varying loads.
The inverter delivers a continuous output of 15 kW, which is the electrical power available at the motor terminals under rated operating conditions. This output corresponds to 20 HP when expressed using a common mechanical power unit. The input rectifier accepts a supply range of 380–500 VAC and operates with three-phase power, enabling direct connection to standard industrial feeders. An integrated EMC shield helps limit electromagnetic interference from the drive’s switching electronics. The IP20 chassis housing protects against accidental contact with internal components but requires installation inside a suitable cabinet. Physical installation uses standard cabinet-mounted frame arrangements that align the drive with the backplates and cooling paths found in typical switchgear enclosures. Adequate clearance around the housing allows cooling air to move through the drive without obstruction.
Local interaction is handled through the Graphical Local Control Panel, which provides access to parameter editing, fault logs, status information, and manual operating controls at the enclosure door. The braking section has no brake chopper, so regenerated energy produced during rapid deceleration must be managed through the DC link or compatible external braking equipment. Electromagnetic emissions are reduced by the integrated RFI Class A1/B (C1) filter, supporting installations that contain sensitive instrumentation or other equipment susceptible to conducted interference. The filter also helps control noise transmitted from the drive back toward the incoming power supply. Fieldbus and accessory options can be selected for integration with the control architecture used by the connected automation system.
