Product Description:

The FC-302P15KT5131F0429H2XGXXXXSXXXXAXBXCXXXXDX is an AC variable frequency drive manufactured by Danfoss as part of the VLT FC 302 Automation Drives series. It converts fixed-frequency line power into a regulated AC output whose voltage and frequency can be adjusted in response to operating commands. This variable output allows a connected induction motor to change speed and torque without mechanical speed-control equipment. The unit is intended for control-cabinet installation and can receive commands from a PLC or another automation controller. In conveyors, pumps, and ventilation systems, controlled motor operation can reduce unnecessary energy consumption while supporting accurate process control.

Continuous shaft power is rated at 15 kW, indicating the mechanical load that the inverter can sustain during normal operation. The input terminals accept line voltages from 380–500 VAC, allowing direct connection to common industrial power networks within that range. Operation requires a three-phase power supply, which provides balanced current to the drive and supports steady motor torque. Protective devices, conductors, and connected motor components must be selected for the drive’s electrical capacity and operating voltage. The adjustable output enables gradual acceleration and deceleration, which can reduce mechanical stress on couplings, belts, and other driven components. Motor speed can also be matched more closely to changing process demand instead of remaining fixed at the line-frequency operating point.

Adaptation B includes no application-specific customization, so the drive uses its general-purpose parameter structure without dedicated application software or added hardware extensions. The unit has no integrated C1 EMC option; an external input filter is required when category C1 electromagnetic compatibility is necessary for the installation. This arrangement allows the appropriate filtering equipment to be selected according to the surrounding electrical system and applicable installation requirements. Human-machine interaction uses the Standard language pack, which provides multilingual menu text through the drive’s keypad interface. Operators can use these menus to review operating values, adjust motor-control parameters, and access diagnostic information. The keypad layout and available accessories follow the established FC platform arrangement, allowing the drive to fit control panels that use compatible Danfoss interface components.