Product Description:

The FC-302P11KT5E21H2BGXXXXSXXXXAXBXCXXXXDX is an AC variable-frequency drive from Danfoss in the VLT FC 302 Automation Drives series. It converts fixed-frequency factory power into a pulse-width-modulated output for motor control. PLCs can use that output to regulate induction-motor speed and torque on conveyors, pumps, and other process machines when centralized control is required inside a cabinet. This arrangement supports applications that need adjustable acceleration, steady running speed, and coordinated response to changing process demands.

The inverter supplies a continuous mechanical output of 11 kW, equivalent to 15 HP, which suits mid-size motors used in HVAC and material-handling lines. Input terminals accept 380 – 500 VAC and use three-phase power to balance line current across standard industrial feeders. An enclosure rating of IP21 / Type 1 shields live parts from finger contact and vertical drips, permitting open-rack installation in clean indoor areas. Empty option slots A, B, C, C0, C1, and D leave room for future communication or I/O cards. This layout allows the base unit to be installed first and expanded later if the control scheme requires additional interfaces.

A built-in brake chopper dissipates regenerative energy during fast deceleration without external hardware. Conducted interference is reduced by the integrated RFI filter, helping the drive meet industrial emission limits and reducing unwanted noise on nearby control wiring. Daily adjustments are performed through a detachable graphical local control panel, which provides direct access to status information and parameter settings at the drive. The control boards are not coated, so the unit is intended for indoor locations free of corrosive vapors. Standard cable entries simplify wiring and support straightforward routing of power and control conductors within the cabinet.