FC-302P11KT5E21H1BXXDXXS001XA0BXCXXXXDX
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Danfoss FC-302P11KT5E21H1BXXDXXS001XA0BXCXXXXDX is a high-performance device in the VLT AutomationDrive FC 302 series, operating at a voltage range of 3 x 380-480 V. It features a control type of V/f and dynamic V/f control, an overload capacity of 150% for 60 seconds, and cooling via air. It allows communication through RS485 and operates at an output frequency of 0-200 Hz.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Danfoss manufactured the FC-302P11KT5E21H1BXXDXXS001XA0BXCXXXXDX. The drive's 11 kW power rating is one of its distinguishing features. This shows how quickly electrical energy can be transformed into mechanical work, allowing it to power motors with high load demands. Operating within the normal industrial voltage range of 3 x 380-480 V, which guarantees compatibility with a variety of power supplies, this power output is accomplished. 22 A, a measurement of the flow of electric charge that is directly related to the device's performance and power consumption, is drawn by the drive. The standard AC power frequency in most locations is 50/60 Hz, which is the frequency at which the FC-302P11KT5E21H1BXXDXXS001XA0BXCXXXXDX is intended to function. This guarantees a smooth integration with the current electrical system drive's output frequency range of 0-200 ut. The drive's applicability for a range of industrial situations is shown by its ability to function under an ambient temperature range of -10 to 40°C.
There are two types of drive control: V/F control and dynamic V/f control. This technique ensures maximum torque and efficiency across the speed range by coordinating the changes in the voltage and frequency applied to the motor control system. It is essential for achieving smooth motor performance and avoiding damage from high current or voltage. The RS485 interface makes communicating with the driver easier. Thanks to this widely used serial communication standard in industrial settings, the drive may be linked to automation systems. The drive's harmonic distortion is around 3%Harmonic distortion refers to unwanted frequencies in the output wave that may cause inefficiencies and interact with other devices. This drive's low harmonic distortion shows that it can provide the motor with clean power while reducing energy waste and interruptions.
Because the FC-302P11KT5E21H1BXXDXXS001XA0BXCXXXXDX is air-cooled, the heat produced during operation is dissipated by the air's natural movement. For drives with this power rating, this cooling technique is usually adequate and more affordable than liquid cooling systems. The drive's overload capacity is 15 for 60 seconds, which shows that it can manage brief increases in load over its rated capacity. Functionality is essential for applications where the motor may sometimes encounter high-demand circumstances, including starting or while carrying large local. Its resistance to moisture and capacity to operate dependably in humid environments without internal condensation is shown by its ability to tolerate an ambient humidity of 5 to 95% RH non-condensing.
Frequently Asked Questions about FC-302P11KT5E21H1BXXDXXS001XA0BXCXXXXDX:
Q: What is the overload capacity of the VLT AutomationDrive FC 302?
A: The VLT AutomationDrive FC 302 offers an overload capacity of 150% for 60 seconds, which allows it to handle peak loads and demanding tasks efficiently.
Q: What is the voltage range for the VLT AutomationDrive FC 302?
A: The voltage range for the VLT AutomationDrive FC 302 is 3 x 380-480 V, which ensures compatibility with industrial systems.
Q: What is the cooling method used for this drive?
A: The cooling method for this drive is air-cooled, which is sufficient for its 11 kW power rating and ensures reliable operation in normal conditions.
Q: What is the protection class of the VLT AutomationDrive FC 302?
A: The protection class of the VLT AutomationDrive FC 302 is IP54, meaning it is protected against dust ingress and water splashes, making it suitable for industrial environments.
Q: What is the output frequency range of this drive?
A: The output frequency range for the Danfoss VLT AutomationDrive FC 302 is 0-200 Hz, providing precise control over motor speed in industrial settings.
