Product Description:

The FC-302P11KT5E20H1XXXXXXSXXXXA0BXCXXXXDX is an AC variable-frequency drive manufactured by Danfoss for the VLT FC 302 Automation Drives series. It modulates the output frequency and voltage supplied to an induction motor, allowing accurate speed control without mechanical throttling. Deployed inside standard control cabinets, the unit connects to field networks through a PROFIBUS interface board and fits the automation architecture used across the series. This arrangement allows the connected motor to match process demand in conveyors, pumps, and other automated equipment.

This drive can supply a continuous mechanical load of 11 kW, which equals 15 HP in imperial units. Input conductors accept 380 – 500 VAC across all three lines, and the power section is designed for three-phase power. The enclosure has an IP20 / Chassis rating, which allows mounting in A, B, and C frame cabinets where ambient air is already conditioned. The cabinet interface uses standard cable entries, which simplifies gland-plate drilling and preserves wiring clearances. Because the printed circuit boards are not coated, the unit is intended for dry indoor locations where airborne contaminants are limited. The model ships without an LCP keypad, so parameter adjustments rely on the fieldbus, a PC tool, or an optional remote panel.

An integrated EMC stage filters conducted emissions to RFI Class A1/B (C1), and motion commands are carried over the fieldbus provided by the A option card, identified as PROFIBUS DP V1 MCA 101. The control core is identified by code 302 and is delivered in the Latest Release revision. No brake chopper is fitted, so dynamic braking energy must be handled by the mechanical load or an external resistor. It does not include a mains disconnect module, so line isolation must be provided elsewhere in the cabinet. The drive uses normal cabinet mounting and a standard language pack, which keeps the installation format consistent with typical control-cabinet layouts.