FC-302N250T5134F4161H2BGXXXXSXXXXAXBXCXXXXDX Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-302N250T5134F4161H2BGXXXXSXXXXAXBXCXXXXDX is part of the VLT FC 302 Automation Drives series and supports three phase power at 380 to 500 VAC mains voltage. It includes a brake chopper, offers a maximum output frequency of 590 Hz, and features a graphical LCP 102 local control panel. The drive has a displacement power factor greater than 0.98 and meets EN/IEC 61800-3 Category 3 EMC standards.
Internal Product Review
The FC-302N250T5134F4161H2BGXXXXSXXXXAXBXCXXXXDX is a Danfoss VLT FC 302 automation drive with three-phase 380 to 500 VAC input, well suited for demanding motion and process control. An included brake chopper and 590 Hz maximum output frequency give the unit strong control flexibility across dynamic applications. High electrical quality is a clear advantage, highlighted by a displacement power factor above 0.98.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-302N250T5134F4161H2BGXXXXSXXXXAXBXCXXXXDX variable-frequency drive is manufactured by Danfoss as part of the VLT FC 302 Automation Drives series. In industrial automation, it modulates three-phase power to regulate induction motor speed, allowing conveyors, pumps, and mixers to match changing load demands while reducing wasted energy. It belongs to the VLT AutomationDrive FC product group and carries the internal series identifier 302, placing it among units with compatible mechanical footprints. The drive is intended for cabinet-mounted installations where space, harmonic compliance, and diagnostic functions are important.
Rated for a three-phase input of 380–500 VAC, the inverter tolerates a line imbalance of 3.0% without derating. A Graphical LCP 102 panel and the standard language pack provide access to operating parameters. The control terminals accept up to 28 VDC and have an input resistance of 4 kΩ. Output frequency is adjustable, with the flux-optimized operating range reaching 300 Hz and full carrier operation reaching 590 Hz. The displacement power factor remains greater than 0.98, helping reduce reactive power demand. The unit has a fault-current rating of 100 kArms, allowing installation on circuits with high symmetrical short-circuit capacity. It also complies with EN/IEC 61800-3 Category 3 immunity requirements and EN 55011 Class A2 emissions requirements.
An integrated brake chopper permits direct connection of external resistors for rapid motor deceleration. The drive does not include a C1 filter, so additional electromagnetic compatibility components may be required for Category C1 operation. Motor cables may extend up to 150 m when shielded or 300 m when unshielded, supporting installations in remote pump rooms and rooftop fan areas. Relay output 02 is rated for 2 A at 400 VAC and can operate compatible auxiliary contactors. The printed circuit boards are uncoated, making the drive suitable for clean, controlled cabinet environments without significant moisture or airborne contamination. A true power factor of at least 0.9 supports efficient use of the supplied electrical power. The adjustable output range and standard control connections allow the drive to serve a variety of motor-driven industrial equipment.
